Gilberto — Controls Engineer

• Siemens S7300 PLC commissioning, with safety • Commissioning of unloading conveyors. • Bowl Feeder Commissioning programming for Kistler press systems. • Communication between injection system, robot and PLC

• Siemens PLC programming with Tesla standard, TIA portal V16. SICAR • Integration of the new Facia model of the Tesla Model 3. • Grafset sequence update for Performance model. • PLC support during production on main Facias line.

• Siemens programming with Pia Automation standard, TIA Portal V18, PLC S71517F. • Start-up of an automated line for the assembly of the K0 PHEV Clutch. • PLC programming for the start-up of 2 cells with 2 KUKA robots with the application of UNIST Lubrication technology. • PLC programming of Kisteler maXYmos NC press systems. • PLC programming of Leak Test systems (LTC-802). • Start-up of conveyors, transfer rotary tables, elevators. • HMI TP1000F programming, with Pia Automation standard requirements. • Parameterization of Vision Sick cameras. • PLC support during serial production hours.

On-site support for the start-up of updates to the main and standby motors for the transfer chains in the FRAME, FINAL LINE, DOORS, TRIM1, TRIM2 lines, controlled by the latest generation VFD, GCCS2 programming standard, PLC L83ES GuardLogix 5580 Safety Controller, Studio 5000 v32. • Start-up of the Power Flex 755 VFD, programming of motor parameters, motor rotation direction test, Autotune test, VFD firmware update. • Validation of sensors, actuators, safety modules, End Of Travel's, E-Stop's. • Firmware update of Encoders. • Programming of wired and wireless vibration sensors, installed in the main and secondary motors for monitoring in PLC, BANNER brand Gateway. • Support during production start-up, alarm debugging, Siemens HMIs with the GCCS2 standard.

• Allen Bradley programming with Ford Next Generation Standard, Studio 5000 v33.0. • Programming of Conveyor's, Shuttle's, VDL's, Roll Bed's, Turn Table's. • PLC programming of Intellitrak, IntelliLift, FlexLift systems. • Commissioning of VFD Safe Armorstart. • Programming of HMI systems with Ford Next Generation Standard.

• Siemens programming with Tesla Standard, TIA Portal V17. SICAR. • PLC programming support on the main seating line, during production hours. • Debugging of sequences, indicators, counters, production timers, cycle time adjustment. • Programming of Siemens HMI systems with Tesla Standard.

• PLC programming for robotic applications of Material Handling, Spot Welding, Sealing, Stud Welding, Roller Hemming. • Commissioning of assembly parts conveyors • Cell programming in mode Tryout, Manual, Auto. • Hardware integration to DeviceNet, and Ethernet networks • Programming of frequency inverters Armorstart Safety Control Module • Siemens HMI programming with TIA Portal, Standard GCCS2 • Implementation of Interlocks for PLC communication between cells and robotic stations • Experience in sub-assembly cell applications on Doors LH/RH, Body Side LH/RH, Fender LH/RH.