Jamie — Robotic Weld Technician

Lancaster Ohio Keep conveyor systems in operational condition Change torque guns and set them up as needed Complete daily and weekly PMS Home robots Locate and change bad sensors Make adjustments to sensors Take maintenance calls and respond in a timely manner

Holland, MI Change electrodes and set pins as needed Reset and home fixtures as needed Home robots and turntables Locate bad sensors and change them Change MIG welder tips Change wire and rethread it when it breaks Fix the Nelson gun when it breaks by rebuilding it (stud gun) Change fixtures according to different jobs and setting them up within the HMI Change pneumatic cylinders and fix them as needed

Walker, MI Set up mig welders in preparation for operators to start production Change tips, rollers, wire and insulators Home robots and turntables as needed Locate bad sensors and replace them Set sensors Add or take away shims Clean pneumatic cylinders and or replace them as needed

Set-Up Technician/Robotic Weld Technician Albion, IN Setting CNC machines up as in mic and calibrating them so that operators can run the machines. Setting up robots after changeovers to run with different parts Setting different programs in different machines and robots and making adjustments with programsso the machines will run properly Doing quality checks on 1st and 3rd parts to make sure that parts are in spec Support production for example resetting machines and robots for operators Doing preventative maintenance such as changing filters changing hydraulic fluid filling up hydraulicfluid when levels are low greasing grease fittings cleaning in and around machines keeping up with 5's • Installing hydraulic pumps electric motors installing and setting up robots installing and setting up machines pulling cylinders from trim presses rebuilding them and resetting them Troubleshoot PLC unable to fix the problem once a diagnosis has been made Troubleshoot and fix electrical problems Able to read blueprints Set up robotic welders by entering the job numbers into the HMI Change weld tips and caps as needed Home robots and turntables as needed Locate and change bad sensors using the HMI as needed Rethread mig wire when they ran out or broke Replace liners, insulators, and rollers as needed