Jacob — Weld Technician / Robot Programmer
Jacob
Pay Rates
Industries Served
Work Preferences
Work History on Automate America
Documents on File
Achievements
5
Ratings
Tenure
Earnings
Hours
Profile
Programming Skills 3
Limited, for example supporting production for Tesla cells at Challenge
About Me
Experienced Robot programmer, Weld Tech & CNC machine operator. Supporting production and keeping the lines moving.
For example;
Changing electrodes, changing bad sensors, resetting the sensors proper, helping the operators run a red rabbit, homing machines, reset light curtains when the operators break them, troubleshooting mechanical problems, troubleshooting PLC issues, troubleshooting electrical issues, set up mig welders for production by changing wire spools etc, resetting and homing robots when they skip a cycle also fix,mechanical PLC issues and help with the daily and weekly PM’s. Home robots including kuka and ABB controls changing weld speed and weld locations. Commissioning of a120 ABB robot weld assembly line.
Skills
• ABB Robots
• Kuka Robots
• Fanuc Robots
• CNC Lathe
• Mastercam
• Aerospace
• EDM
• Cimtron
• Bobcam
• CNC Swiss
• CNC Programming
• Blueprint
• CNC Mill
• Axis
• Mazak
• Electrical Discharge Machining
• Blueprint Reading
• Calipers
• Press Brake Machine
• Micrometer
• GD&T
• Manufacturing
• Press Brake Machine
• Mechanical Knowledge
• Machining
• Forklift
• Lean Manufacturing
• Precision Measuring Instruments
• Quality Inspection
Skilled Trades 3
Professional Competencies 2
Applications 5
Tools, Machines & Equipment 10
Customer Reviews5
Good communication, hard working.
Hard working, thanks for the help on our ABB robot cell.
Jacob has been a great help to our commissioning of ABB robots at the Challenge MFG plant in Pontiac MI. He is a hard working programmer. We will gladly have him back for more projects. Thanks for the help Jacob.
Jacob did a great job supporting our production lines with kuka robots and weld and assembly. His knowledge and experience was invaluable.
Jacob did a great job while with us, but had to leave the project due to a family emergency. Would love to have him back when he is available again.
Work Experience8
Challenge MFG Plant Pontiac MI. ABB / IRC5 robots cleanup of existing line: Improved cycle times, debugging, efficiencies, etc. Spot weld, Sealer application, MH, 1 stud weld and henrob rivet guns. There are about 60 robots in the system, RH and LH front rail with a cycle time of around 1min 30sec. Project was also extended to help commission the addition of 60 new robots to the existing line for 3 new model additions. Stayed on after installation and commissioning was completed for production support to help the line operators and robot tech learn how to support the line.
New equipment ramp up and production support for seating line. Mainly Kuka robots. SKS power systems. Mig welding.
Supporting production or keeping the line moving for example changing electrodes, changing bad sensors, resetting the sensors proper, help The operators run a red rabbit, homing the machines, reset in the light curtains when the operators break them, troubleshooting mechanical problems, troubleshooting PLC issues, troubleshooting electrical issues, set up mig welders for production by changing wire spools etc, resetting and homing robots when they skip a cycle also fix,mechanical PLC issues and help with the daily and weekly PM's Home robots including kuka and ABB controls changing weld speed and weld locations
Albion, IN CNC machinist, Setup tech. assignment on location to assist with production needs on antiquated equipment. Contract Employment
Plymouth, IN Wire EDM setup operator, CNC Swiss machinists setup operator, 5 axis CNC lathe setup operator. Tight tolerance medical implants and instruments offer challenges and opportunities to learn daily. I am proud of the quality and quantity of my work in this industry.
Elkhart, IN Wire EDM programmer/setup/operator, Samsung lathe programmer/setup/operator
Elkhart, IN 6 axis Okuma lathe setup/operator, six months of machining experience I was promoted to second shift team leader. In a union environment, I gained a solid understanding of CNC programming and good machining practices.
Goshen, IN Leader in High Volume Receivers department. Coordinating fabrication department with 26 manual weld cells, 12 robotic welding cells, band and mitre saw/punch and brake press cells. Training an outstanding team of hardworking talented welders was an honor for me.
Education / Training / Certificates1
EACC in Welding Technology Elkhart Area Career Center - Elkhart, IN 1994 to 1996
Related professionals
- matthewProgram Manager · Mooresville, IN
- LeeMaintenance Technician
- DavidSr. I&C Design Engineer · Laporte, IN
- Hamzain the capacity of Controls Engineer · Fishers, IN
- DawnSenior Controls Engineer · Oakford, In
- MarkControls Engineer · Columbus, IN
- MattAutomation Engineer · Centerville, IN
- AshrafPlant Manager · Fishers, IN