Liviu — Electronic Technician

Industrial Electrical College, Alesd, Romania H.S., Electronics, 1978 Major: Electronics. PROFESSIONAL EXPERIENCE Century Snacks LLC Director of Engineering and Maintenance 09-2016 - Present Responsible for: Designing, Implementing, Startup, and maintaining the following systems: Packaging lines, Processing lines, Kitchens, Filling lines Refrigeration Systems. Power Distribution up to 0.4KV Install one 6K Lb./Hr. Roaster and filter Design and Install for Toyo Pack Line's; Vib Conv; Bucket Elevator; Yamato Scale; Platform; Toyo Pouch Filler; X-Ray; Checkweigher; Bagger. Mauve a plant with 6 packaging lines from El-Segundo nearby LA airport to city of Commerce facility Install centralized Nitrogen System with two generators Install centralized Loop Compressed Air System Install new pack Room with 5 Matrix Pack Line and 3 Toyo including all utility Hire and supervise contractors for building and equipment installation Generate all mechanical and electrical drawings for construction Design and install an Oil Delivering system that have 2 fresh oil 10K Gallons and one used oil tank. Including all automation and integration with the 3 roasters Automate oil filtration system for two roasters Upgrade the waste water system and install a new grease separator Upgrade all plant lighting with LED and automate base on the Sunrise Sunset data Installing new racking systems on the warehouse Upgrade new forklifts fleet Support the investor on other plants location design, implementation and startup Overhill Farms Company Director of Engineering and Maintenance 03-2015 - 09-2016 Responsible for: Designing, Implementing, Startup, and maintaining the following systems: Packaging lines, Processing lines, Kitchens, Filling lines Refrigeration Systems. Power Distribution including Transformers and substations from 13,KV To 0.4KV and low voltage 0.4 KV Projects management over 107 major new and retrofit investment projects in value of 1.2 Mil on 2015 and 5 Mil on 2016, to bring the company back to profit last year 1mil this year 10 Mil. I can detail on this if needed. Managing Preventive maintenance, equipment integration including Purchasing Module implementation on the COGS PM program 3 Managing 2 different locations, manufacturing plants, maintenance departments of 45 workers Engineers, Supervisors, Technicians and Mechanics. Automation and control on the Refrigeration systems at two locations Installation of a completed new line for Eating Well project plant1 Installation of a new Afterburner, Oxidizer for plant 2 Golden West Trading /Completely Fresh Foods Company Corporate, Plant Engineer 11-2013 - 03-2015 Responsible for: Designing, Implementing, Startup, and maintaining the following systems: Packaging lines, Processing lines, Kitchens, Filling lines Refrigeration Systems. Power Distribution including Transformers and substations from 13,KV To 0.4KV and low voltage 0.4 KV Projects management that end up in moving 3 plants from different location in a new state of the art building in city of Vernon. Bring the building to the code, install all utility work with inspectors and contractors, add all equipment to MP2 preventive maintenance, kip up with every day equipment location changes by the owners; building spare parts room and add to the MP2 program, build a maintenance department and assignee responsibilities, retrofit the plant wide high pressure hot water system to adjust pressure on demand; retrofit the Ozone water system t be sized for the entire plant; retrofit the Glycol chill system that feed the 2 chillers to be functional and size right; retrofit the positive air pressure in to the rooms and centralize the air system with fire alarm to shutoff all the inlet fanes; automate all 6 kettles from kosher and non kosher kitchen; install supplementary steam boilers in the kosher and non kosher site to meet the demand; automate the boilers maintenance drain, purge system; retrofit the sewer undersized system to meet the demand; including the defecting pumping system; install centralized vacuum system for the Multivac and Riser equipment; Install 2 Cryovac fillers; install GEA Fryer, GEA Oven; install 2 new Co2 Spiral Freezer; install; metal detectors; ADCO packaging equipment; installation of a fryer afterburner required by AQMD. A total equipments count 446. This was all working 6 and 7 days a week 10 to 12Hrs/day. GBA. Overhill Farms Company Corporate, Plant Engineer, 04-2012 - 11-2013 Responsible for: Designing, Implementing, Startup, and maintaining the following systems: Packaging lines, Processing lines, Kitchens, Filling lines Refrigeration Systems. Power Distribution including Transformers and substations from 13,KV To 0.4KV and low voltage 0.4 KV Projects management, startup, commissioning and maintenance. Bolthouse Farm, Bakersfield CA, Senior Electrical Engineer, 2011 - 04-2012 $120K+20%bonus 4 Responsible for all electrical functionality and maintenance for substations (115KV; 15KV), MCCs 480VAC, also for addition of new equipment, process, blow mold, fillers, cappers, bottles conveyors, packers, case conveyors, palletizes, pallet conveyors, wrappers, and all automation that come with those equipments for beverage line. Responsible for refrigeration system upgrade from MISTIC to PLC + energy savings. Responsible for two carrots processing line, that has hydro-pumping, processing, bagging, packing. Responsible for concentrate plant that have processing equipment. In general power distribution and automation and controls, expansions, maintenance and troubleshooting. Responsible for getting quotes from vendors, preparing capital request and bid packages, execution of the project and commissioning, turn over to maintenance. U.S. Gypsum, Torrance, / Santa Fe Springs, / South Gate, California Plant Engineer, 2005 - 2011 Responsible for Designing, programming, installing, and maintaining all PLC systems in the plant, as well as designing new systems for further automation and power distribution. Also, responsible for al projects updating all systems with newer technologies such as, frequency controllers, flow controllers, mass controllers, and temperature controllers. Managing Electrical Safety Model program and Racking Model Program; Responsible for Energy savings; Responsible for all IT support in the plants; 5S projects and 6 sigma projects. ConAgra Foods Retail Products Company Grocery Foods Group Corporate, Electrical, Senior, Project Engineer, 1999 - 2005 Responsible for: Designing, Implementing, Startup, and maintaining the following systems: Packaging lines Processing lines, Kitchens ETC. Power Distribution including Transformers and substations from 115 KV To 13KV, 69KV To 13KV, 13,KV To 0.4KV and low voltage 0.4 KV Projects management, startup, commissioning, and turn over to maintenance. Hunt Wesson Integration Projects IHF Integration Projects U.S. Gypsum, Santa Fe Springs, California PLC Programmer / Computer Technician, 1996 - 1999 Responsible for programming, installing, and maintaining all PLC systems in the plant, as well as designing new systems for further automation. Also, responsible for updating all systems with newer technologies such as, frequency controllers, flow controllers, mass controllers, and temperature controllers. Thai Gypsum LTD., Thailand Process Controls / Electrical, Engineer, 1991 - 1996 Responsible for programming PLC's, commissioning field devices, start-up, fine tuning all PLC systems and other related electrical and mechanical devices. Send from USG as an expert for commissioning, one year contract, and end-up being 5 years. 5 U.S. Gypsum, Torrance, California Electrical Supervisor, 1988 - 1991 Responsible for programming PLC's as well as installing and maintaining all electrical systems and devices used in the plant. Hendinger Electronics, Whittier, California Audio Video Technician, 1988 - 1989 Responsible for repairing TV's, Video Cameras, Answering Machines and Amplifiers. Sabina Electrical Engineering, Anaheim, California Final Test Technician, 1987 - 1988 Responsible for testing and repairing AC,(VFD), and DC drives and systems. Siemens Automation, Munchen, Germany Electronic Technician, 1987 - 1987 Responsible for the electrical wiring of the largest Bayer Bank in Munchen. Territorial Center for Computing, Oradea, Romania Electronic Technician, 1983 - 1987 Responsible for maintaining mainframe computers, accessories, and peripherals. Spumotim, Timisoara, Romania Electronic Technician, 1979 - 1983 Responsible for maintenance of small robotics (By Desma and Canon) systems in the Chemical/Polyurethane Industry. PUBLICATIONS "Music & Color." Technium Magazine. Romanian Government, 1978. The article was on research conducted in the application of color to various sound frequencies, in essence to make music a visual as well as an auditory experience. PATENTS: 1. No. US 6675877 B2 2. No. US 6789938 B2

University of Petrosani, Petrosani, Romania M.E.E., Electromechanical Engineering, 1988 Major: Electrical, Electromechanical Engineering. Specialized in mining machines and equipment automation

Industrial Electrotechnic College, Timisoara, Romania B.S., Industrial Automation, 1983 Major: Electrical - Power Distribution. Industrial Electromechanical, Timisoara, Romania A.A., Mechanical Machines, Minor: Auto Mechanic, 1980 Major: Mechanical 2