Shane — Control Engineer

Very experienced in programming the CMore HMIs

I currently hold Michigan journeyman Licensed journeyman for over 18 years. Journeyman inside wireman(journeyman) for over 19yrs.

Global Solar Energy Tucson, AZ 2018-Current Control Engineer - Immediately and exclusively inherited ongoing R&D project which required correcting and re-engineering of the electrical and control drawings. - Took the responsibility on own time to rewire above mentioned project's control cabinets, and field devices consisting of all I/Os for Allen Bradley 13-Slot 1756-L55 ControlLogix 5555 controller (PLC), as well as 480v-120v distribution cabinets. - With limited on hand information, and no turnover, was able to determine from the end-user, and equipment group what the machine requirements were, and began to immediately correct deficiencies in existing logic and Automation Direct HMI programs which were only 25% complete. - Utilizing Rockwell Studio 5000, completed over 1000 rungs of ladder logic to complete the R&D project to meet the hard deadline for acceptance testing. - Responsible for correcting deficiencies in the existing programming of a roll rewind machine and adding end of roll, end of run logic so the machine would run in a safe, correct and efficient manner. Required to do this within a two-week timeframe while supporting technicians in the field

IBEW LOCAL 252 Ann Arbor, MI 1999 - Present Journeyman Electrician, State of Michigan, License ID # 6328855 - Crewmember on the installation of new printing press for The Ann Arbor News consisting of AC/ DC motors, VFDs, Light curtains, speed switches, motor controllers and PLCs - Specialized in motor control circuits, relay logic, PLCs, substations (primary feeds) metering and controls. - Performed independent acceptance testing to ensure the proper operation of newly installed electrical systems prior to its being energized, provided baseline measurements for future comparison, and continued suitable operation for a safe and reliable electrical system

Leidos Innovative Solutions Tucson, AZ 2018 Software Control Engineer - Responsible for supporting Programmable Logic Controls(PLCs) and Human Machine Interfaces(HMIs) for six regional mail order pharmaceutical distributors. - Assist in engineering, upgrading and implementing automated processes for antiquated control systems throughout all six facilities. - Have a strong understanding of Function block, Ladder, Structured Text style PLC programming and incorporating these process into a large and complex production environment. - Assist instrumentation technicians, electricians, and repairman, in troubleshooting and repairing breakdowns to reduce production downtimes, and lost revenue

University of Arizona Tucson, AZ 2015-2017 Electrician/PLC Programmer - Designed, programmed and implemented the retrofit of 84 antiquated and outdated Automatic Transfer Switches that are responsible for managing power outages for all life safety equipment throughout the entire UA campus. This included designing the entire electrical system and CAD drawings for the above mentioned ATS project. - Programming languages utilized in redesign are C, C++, C#, Java, JavaScript, as well as programming function block logic in HMI, PLCs and integrating different communication protocols such as Modbus and BacNet necessary to automate, control and update these antiquated Automatic Transfer switches (ATS) systems on campus which can now be controlled and monitored on UA intranet or internet. This project is estimated to save the UA over $100,000. - Completely reengineered and installed sewage tank level monitoring system utilizing programmable logic controllers, ultra-sonic level controls, and pump controls to prevent spills of bio hazardous materials while reducing cost and minimized safety concerns. - Maintain, troubleshoot and repair all 84 generators and ATS' control and distribution systems on campus

Freeport McMoran Morenci, AZ 2011-2015 Instrument Technician/Diagnostic Electrician - Perform preventive maintenance/calibration and repair of automation systems which includes ultrasonic level controls, PLC's, flow meters, and auto valves utilizing 4-20ma analog and 0- 10VDC analog - Design, install and maintain control systems automating motors, pumps, and other various electrical systems that make use of PLC's, relay logic, and Variable Frequency Drives (VFD) - Repair, maintain, and troubleshoot pneumatic control systems, along with 480v to 4160v electrical systems - Implemented the use of the National Electrical Code (NEC) as the standard for electrical installations and maintenance of electrical systems for the entire mine - Annually trained safety staff on the hazards of electricity and how to look for potential issues or concerns throughout the mine

Huron Valley Electric Ann Arbor, MI 2010-2011 Journeyman Electrician - Installed new substation consisting of Primary switches, 13,200v to 480/277v transformers, and switchgear in accordance with the NEC - Designed and installed control system that utilized emergency stop circuits for large welding lab which shut down bus duct, sub panels as well as machinery in during an emergency. - Crew leader on the upgrade of entire 480v 24 space Motor Control Center including all control systems as well as all metering and monitoring systems

Turner Electric Ann Arbor, MI 2007-2010 Journeyman Electrician (Contracted to the University of Michigan Zone Maintenance department as a zone maintenance electrician) - Installed, repaired and troubleshot several dynamometers utilizing relay logic as well as solid state components including flow meters, temperature switches, and gas monitoring systems - Installed and maintenance electrical systems within the University of Michigan NANO labs, following strict guidelines for clean room environments - Installed experimental biped robot, which included coordinating several different control systems and assisting in configuring of the transformers to facilitate the non-standard voltage requirements - Installed, repaired, and updated control systems to create safer work environments on systems consisting of building air supplies, pump systems, and motor control centers - Developed standard operating procedures and guidelines for the implantation of a yearly Motor Control Center inspection and preventive maintenance program

2006-2007 Pfizer Global Research and Development Ann Arbor, MI Technical Expert, Automation and Electrical - Installed, repaired and maintained equipment and electrical systems in accordance with the NEC and FDA regulations - Maintained regulatory compliance on life safety and critical electrical systems by repairing failures, performing PM tasks, and installing new equipment such as PLCs, VFDs, and HMIs - Implemented new software system for managing life safety equipment - Repaired, troubleshot and maintained PLC systems for D.I. watering, reverse osmosis watering systems, as well as temperature control systems for animal research facility - Designed computer-controlled laser that was required to fire the laser at precision increments to simulate chronic pain. - Worked in clean room environments maintaining FDAs stringent regulations and requirements on a daily basis

Raycon Corp. Ann Arbor, MI 1997-1998 Controls Electrician - Full understanding of ladder logic, Function Block logic, utilized blueprints, and ladder diagrams which helped to foresee errors in drawings and correct them before it reached the building stage - Installed rigid conduits, proximity switches, limit switches; photo eyes, Allen Bradley SLC 500 (PLC), hydraulic valves, pneumatic valves, motors, and VFD controllers - Responsible for updating relay logic based machines with PLC's - Electrical Team member on various one off machines supporting the yearly model upgrade of the assembly line for General Motors and Ford Motor Co

1992-1997 United States Navy Construction Electrician - Responsible for base maintenance, including power plant, overhead power distributions, inside wiring, motor control circuits and computer networking - Trained junior electricians in AC/DC theory, motor controls, troubleshooting techniques, and safety - Collateral duties included managing local area network, working with Windows and Novell networking software, along with repairing and building of complete computer systems