Mark — Control Engineer
Mark
Industries Served
Will Work
Work History on Automate America
Secure & Personal Files
Verified documents on file. Only Mark and Automate America admins can view or download them — except the background check, which is shared with a customer when they shortlist Mark.
- Resume✓ On file
Programming Skills (9)
work with ver 6-7.5
About Me
, Laurens South Carolina 29360 Over the last two years I have worked with KS Control in Duncan. My Task were to update, improve and development of HMI and PLC software. Program support for Auto manufacture in the area. Start up and commission of machines. I have worked with Siemens PLC and HMI software. I have continued to work with some Allen Bradly 5000 studio. I have programmed Safety for S7 software. In the past working with Hartness International installing packaging machine in the United States. My Job was installing and setup of 6400 Dynac accumulators and 4500 Shrink wrap machines. While at Hartness I also did Integration of machining centers with line control. Machine center to machine center interlock and controls. I have traveled out of the county with both Hartness and Cryovac. I have plastic extrusion experience while working with Cryovac. I helped setup a pilot plastic Bag plant in Monterrey Mexico. In Monterrey Mexico, training operator and maintenance personal to run and maintain Bag machines for Cryovac. I have programming experience with Allen Bradley systems. I have worked with PC base PLC control systems. 2 wire interfaces systems. I have been programming in Allen Bradley/Rockwell 5000 PLC systems and Allen Bradly/Rockwell 500 PLC systems the last few years. The machine I worked on contained Allen Bradly 6000 Kinetic and 5500 Kinetic servo drives 5 or more drives. ASi safety and I/O interfaces. Belimo actuators for dampers. AB Gaurdmaster
Skilled Trades (8)
supported start up of production line in the Auto, food and beverage
setup and calabration of heat controlers. Barba colman Amp stack and others
have worked pulling cable up to 2000 mcm
worked with smart valve and different types of system for CNC machine to slitters
able to make repair parts if needed and none in stock
Software Competencies (3)
Professional Competencies (5)
systems, AB and Siemens. touch screens, key reader RFID readers,
worked with SEW and AB servo drive and VFD
Applications (13)
shrink wrap machines, films
AB SEW and other drives
Work Experience(14)
KS Control (2017- 8/2019) Duncan South Carolina Job Title: Control Engineer Duties: Control Support, PLC and HMI Development for Siemens - Worked at customer site to support S7 programs HMI and connection between machines. - Siemens S7 PLC and WinCC - Programmed Zenon on Beckoff HMI Panel - Some TIA 13 and 14 for HMIs - Siemens LOGO! Projects - Classes Level 2 programming S7 Siemens
Hartness International (2002-2017) Greenville South Carolina Job Title: Customer Representative / Service Technician Duties: Training customer on equipment. Setup and Installation of Hartness Machines. Integrated machine centers with Allen Bradley software with structured text, block control, custom addon, User Defined Tags (UDT). Debug programs as needed. Created solution for customers' needs for smooth line control. Programmed panel views with F function keys and touch screen panels. Added screens, buttons, alarm banners on panel view plus. Interfaced 500 plc to 5000 plc programs. Setup comms between systems for controls. Added control logic for machine addon of field modifications. Work with other mechanical and electrical designers to solve customer problems while on customer site. Maintained and updated field prints and changes. Daily uploads of plc and hmi programs while on site. Site reporting and management when needed
Cryovac (1989-2002) Simpsonville South Carolina Job Title: Emergency Maintenance Repair / Electronic Technician Duties: Machine Repair / Machine updates. Reliably Team, Spare Parts inventory control, Buyer for Spare part repair. Programmed with AB 2, 5,500 software. Updated line control and system control. TI PLC, Armron PLC and SLC 500 PLC Maintained electrical and mechanical control for multi stories process lines. Worked on PID and tension feedback controls. Updated manual control to touch panel control units. Worked with process engineers to change line to give high thru put. Worked on and maintained High Voltage 500KV DC units all controllers and interlock safety devices sensors. Most of the lines used PC base interface to Allen Bradley control for operator interface. Radiation sensors, light beam safety detector, fiber optic control. Worked with weight lost control systems. Air conveying system. Rail car unloading and truck unloading of plastic pellets. Viscosity control, 16 color printing presses. Update of bag machine from mechanical to servo motors. Worked on overhead box conveyor systems to palletizer. Full pallet staging to warehouse. Worked to improve life of conveyor on full pallets by turning off section that were not in use. I was part of a reliability team to bring failing machinery back in to good operation condition. Built test stands and control for testing of repair parts and systems
Cincinnati Milcron (1984-1989) Fount Inn South Carolina Job Title: Maintenance/ System Repair Technician Duties: Maintenance. Programming update and upgrades of machining centers and test centers. Work on CNC control machine made by Cincinnati Milcron, G and L, Walberg and other CNC machines Control type 900 and big blue Milcron controls. Program type core memory Tape reader program. Drive type Reliance and ACRO DC drives Milcron maximizer controller programmed by e prom programmer Updated test stands and built test units for the testing out part of machine before assembled
Education / Training / Certificates(3)
Electronics
Over the last two years I have worked with KS Control in Duncan. My Task were to update, improve and development of HMI and PLC software. Program support for Auto manufacture in the area. Start up and commission of machines. I have worked with Siemens PLC and HMI software. I have continued to work with some Allen Bradly 5000 studio. I have programmed Safety for S7 software. In the past working with Hartness International installing packaging machine in the United States. My Job was installing and setup of 6400 Dynac accumulators and 4500 Shrink wrap machines. While at Hartness I also did Integration of machining centers with line control. Machine center to machine center interlock and controls. I have traveled out of the county with both Hartness and Cryovac. I have plastic extrusion experience while working with Cryovac. I helped setup a pilot plastic Bag plant in Monterrey Mexico. In Monterrey Mexico, training operator and maintenance personal to run and maintain Bag machines for Cryovac. I have programming experience with Allen Bradley systems. I have worked with PC base PLC control systems. 2 wire interfaces systems. I have been programming in Allen Bradley/Rockwell 5000 PLC systems and Allen Bradly/Rockwell 500 PLC systems the last few years. The machine I worked on contained Allen Bradly 6000 Kinetic and 5500 Kinetic servo drives 5 or more drives. ASi safety and I/O interfaces. Belimo actuators for dampers. AB Gaurdmaster
Facilities Worked At(8)
Frequently Asked Questions
- What does Mark do?
- Mark is a Control Engineer on Automate America, the global professional marketplace for skilled talent across industrial, commercial, and residential work.
- Where is Mark located?
- Mark is based in Greer, South Carolina.
- What does Mark specialize in?
- Mark works with Allen Bradley / Rockwell, Siemens, Zenon, SEW, Nordson as a Control Engineer on Automate America, the global professional marketplace for skilled talent across industrial, commercial, and residential work.
- Is Mark available for work?
- Availability unknown. Mark has not marked it recently.
- How do I connect with or hire Mark?
- Create a free profile on Automate America and send a connection or contract request from this profile. Mark can then respond and coordinate the work directly through the platform.