Ian — Contract Commissioning PLC Engineer

12/17-1/18 Aerotek -Contract Commissioning PLC Engineer for automated distribution warehouse located in Tolleson, AZ. Duties included, but not limited to: Real-time monitoring and troubleshooting of the Sequential Flow Chart and PLC program; Training equipment cell operators in use of the cell. Debugging/amending PLC code

6/17-11/17 Wilson Electrial Services Corp -Journeyman commercial electrician at ASU in Tempe, AZ. Laying out and installing branch power systems for Central Mechanical Plant at ASU BioSciences Bldg. Responsible for race way and conductor installation, locating and installing equipment control devices, including VFD's, motor starters, and low voltage controllers

4/17-6/17 Coca Cola Refreshment -Instrumentation Technician at Coca Cola production facility. Duties included, but not limited to, identification and correction of malfunctions in the production lines to ensure no plant down-time, writing new logic code for existing equipment, planning and implimenting upgrades and improvements to various production systems

9/15-3/17 Magnum Electric -Leadman for heavy commercial construction projects in North Dakota. Responsible for all control systems, including all PLC's control cabinets and conductor installation, and branch circuit layout and installation in Detention Facility

9/14-6/15 Intel Corp -Manufacturing Technician. Responsible for operations of semiconductor production tools in a clean room environment, "Acid Buddy", and Work Place Organization

3/14-6-14 F & B Manufacturing -Shift Maintenance Electrician. Responsible for installation and trouble shooting of aerospace production equipment, including PLC operations, hydraulic and pneumatic control systems

7/13-3/14 Jones Lang LaSalle -QA/QC Commissioning& MV Tech on new semiconductor fab plant reporting to and directly involved with Electrical Engineer. -Sustaining Maintenance/ MV Tech. Responsible for MV operations and sustaining maintenance activities in Intel Semiconductor plant. Including but not limited to: switchgear and power distribution, hydraulic and pneumatic control systems, PLC installation and trouble shooting

2/13-7/13 Corbins Service Electric -Intel Fab tool install technician. Installing semiconductor production tools, PLC's, and pneumatic control systems

8/12-1/13 Helix Electric Inc -Leadman responsible for layout, installation, and termination of 480V distribution switchboards at Intel plant

5/12-8/12 Construction Strategies Inc -Instrumentation and Control Technician assigned to Mckee Electric on LPG/Butane Transfer/ terminal site. Duties including, but not limited to: installation and termination of pneumatic and hydraulic FIT's (flow), PIT's (pressure), PLC's, Variable Frequency Drives, and related control and Human Machine Interface systems

7/10-5/12 KSK Electric -City of Scottsdale: North Scottsdale Water Campus and Chapparell Water Treatment Facility; City of Leadman/Instrumentation and Control Technician. Duties including, but not limited to; Heading teams ("Working Leadman") in lay-out, installation, termination, and troubleshooting of water treatment facility's pneumatic and hydraulic instrumentation and control systems including, but not limited to: New and add-on/upgrade of existing FIT's (flow), PIT's (pressure), TSS's (suspended solids), LT's (level transducer/transmitters), ROTORK, and other various pneumatic and hydraulic, valves, solenoids, and control systems. Lay-out, installation, terminations of new MV Substations, Motor Control Centers, Variable Frequency Drives, Remote Telemetric Units, Remote I/O's, upgrades/add-ons of, and retro-fits to, same

4/10-7/10 RML Electric -Industrial Maintenance Control Technician: Sub-Contracted to CMC Steel as a Shift Electrician for steel micro-mill rebar plant. Duties included, but not limited to, upgrades, preventative maintenance, and troubleshooting on 35kv substation and arc furnaces, automated production equipment; pneumatic and hydraulic valves, solenoids, control systems, and Variable Frequency Drives; new system install, oversight QA/QC and termination of other subcontractor work

11/09-4/10 CLP Resources -Duties including, but not limited to, piping, line-voltage and control wiring in explosion proof (NEMA 12/4X) environments for animal feed/grain plant; pneumatic and hydraulic valves, solenoids, control systems. Fountain Hills Waste Water Treatment Facility and Micro-Filtration Facility: -New construction electrician at Banner Desert Samaritan Medical Center

8/09-11/09 New River Electric -Superintendent: Oversaw multiple 4-6 man crews for high-end retail shops in Scottsdale Fashion Square Mall

3/05-6/09 Wilson Electric -ASU Polytechnic campus, Design-Build. Ran underground crew for high voltage lay-out and install for three buildings' services (4000amp, 3000amp, 2500amp SES. 500kva xfmr's, UPS/xfer switches, low-volt distribution), placement of 90+ floor boxes (120v,data, and A/V combined boxes). All distribution penetration lay-out, in-bedded "Blue-bangers" for pipe-rack/cable-tray support lay-out and installation. After slab-on-grade/slabon-deck phase, headed special-systems crew for science/engineering lab building, instrumentation terminations, as well as lay-out, feed, and commissioning for all buildings' rooftop HVAC/Mech. equipment (AHU, MUA, EF, "split-system" AC's, boiler/pump rooms, VFD's), lab process mechanical rooms and related hydraulic and pneumatic instrumentation and VFD's. Power/control rooms for elevators, including commissioning and state inspections. -Barrett Honors College, ASU Main Campus. Branch & special systems leadman for dorm building on $16m/9 dorm project. Jobsite Logistics Coordinator responsible for ordering material from supply house, tools and material from company offices, and allocation/movement of tools/materials on-site. -Gila River Telecom. Leadman ("#2") on telecom facility for the Gila River Indian Community. Responsible for layout, install, testing, and inspections for high voltage distribution/one-line, special systems, high voltage lighting, and low-volt distribution. Installation and termination on HVAC/Mech and FA instrumentation and monitoring equipment. -Red Mountain Corrections Campus, Eloy. Ran small crew responsible for electric rooms, security rooms, mechanical rooms, BMS/FA safety/smoke evac equipment

6/04-2/05 ASPC Marana -Facility maintenance electrician on AZ Dept of Corrections complex

5/03-6/04 Graham County Highway Dept. -Construction and Maintenance Division. Worked as electrician, carpenter, equip. operator, form setter, concrete finisher, mason, structural-steel erector

7/02-5/03 Self Employed. -Service and upgrade/remodel contractor. Electrical, carpentry, tile flooring, and painting

2/02-6/02 Delta Diversified Enterprises -Commercial Journeyman Wireman

12/01-2/02 Self Employed. -Service and upgrade/remodel contractor. Electrical, carpentry, tile flooring, and painting

6/99-12/01 IBEW. -Journeyman Wireman for union contractors. Extensive work in various semi-conductor plants, clean rooms, interstitial spaces, as well as industrial work on government infrastructure projects

6/97-6/99 Self Employed. -Room-addition/remodel/service subcontractor of Ahwatukee area. Commercial service/upgrade electrician

1/95-6/97 Younger Bros. Construction. Residential framer on tract and custom homes throughout valley. Virginia

6/92-1/95 Fairfax/DC Metro. Area: -Worked with various electrical contractors-including JF Electric, H&H Electric- serving my apprenticeship + "OJT" on both residential and commercial projects

6/89-6/92 Labor: -Freelance/contract work as general laborer/helper on residential and commercial projects, both remodel and new construction. interfacing on prison dorm buildings, including life