Jackie — TX Manufacturing Engineer

01/15-Present Goodman Manufacturing/Daikin, Houston, TX Manufacturing Engineer - Controls Troubleshoot machines that are down to maintain production capability. Upgrade outdated control systems on machines. Used Siemens Portal to program S7/1200 and Basic Panels for machine upgrades. Modified Allen-Bradley Controllogix, SLC, and Micrologix programs to improve existing machines. Designed and Installed Fanuc Robot Cell. Used Factory Talk View to modify existing HMI's. Used Factory Talk Transaction Manager for data collection

06/12-11/14 TAS Energy, Houston, TX Senior Controls Engineer PLC and HMI Programming using Allen-Bradley Controllogix PLCs and Factory Talk View SE. Designed and Reviewed Drawings, Programmed PLCs and HMIs for Turbine Inlet Chilling Systems. Systems utilized redundant Ethernet ring architecture, redundant PLCs, and Modbus communications to third party devices. Had 3 major projects for LNG downstream facilities. This work included the front end engineering design (FEED) and programming

09/09-06/12 Factory Automation Systems, Atlanta, GA Project Engineer PLC and HMI Programming for Controls Projects using Siemens S7, and Allen-Bradley Controllogix PLCs Managed capital projects for a major chemical company

09/08-09/09 Processes Unlimited International, Tucker, GA Project Engineer PLC and HMI Programming for Controls Projects using Siemens S7, and Allen-Bradley Controllogix PLCs

02/08-09/08 Factory Automation Systems, Atlanta, GA Project Engineer PLC and HMI Programming for Controls Projects using Siemens S7, and Allen-Bradley Controllogix PLCs

09/06-02/08 Siemens Power Generation, Orlando, FL Control System Engineer Design and program control systems for power plant environmental controls using Allen-Bradley Controllogix PLCs

02/06-09/06 Lashley, Cohen, and Associates, Lawrenceville, GA Project Engineer/Contract Small to medium sized projects using Siemens S7, Allen-Bradley SLC 500 and PLC 5

07/05-02/06 Control Logic, Inc, Cumming, GA Project Engineer/Contract Program changes and new line installations for a major chewing gum manufacturer. Systems used Siemens S7/300 and Iconics Genesis HMI software. Projects also used Siemens AC drives and Siemens Touch Panels

01/05-07/05 International Services, Inc. Atlanta, GA Project Engineer Many small project using Siemens S7/300 and S7/200 PLC Hardware and Siemens Touch Panels. Developed a new system using Wonderware's Archestra software

06/04- 01/ Technologies, Inc. Marietta, GA Project Engineer Installed several Syrup Room control system upgrades. Also worked with chiller control design and refrigeration system controls. Projects used Allen-Bradley PLC components and drives. Intellution IFIX was used for the HMI

06/03- 06/04 Georgia-Pacific Corporation Russellville, SC Electrical Engineer Supervised 9 electrical maintenance employees. Work included small projects to eliminate repetitive down time causes. Converted panelview applications to Wonderware. Installed a Wonderware quad screen system

05/02- 03/03 Cadence Technologies, Inc. Alpharetta, GA Senior Controls Engineer Projects included CIP systems, pasteurizers, mix rooms, and recipe systems. Used Allen-Bradley PLC5, SLC500, and Control Logix PLC's and an RSView operator screen package

05/01- 05/02 Technical Associates, Inc. Atlanta, GA Senior Controls Engineer Designed and implemented changes to a complex multi-PLC network to add CIP tracking and reporting capabilities to a major soft drink supplier's plant. Installed various plant improvements involving Allen-Bradley Panelviews and PLC's, AC drives, and MCC's

11/00-05/01 International Services, Inc. Atlanta, GA Senior Systems Engineer/Contract Provided hardware engineering support for a major international power plant machinery supplier. Designed control systems using Siemens hardware

10/99 - 07/00 Atronix Engineering, Inc. Norcross, GA Project Engineer Installed 6 complete fiber optic cable lines. These systems used Allen-Bradley PLCs and a Wonderware or RSView operator interface. Equipment included fiber payoffs, extruders, and winders

1/99 -10/99 Summit Automation, Inc. Gainesville, GA Senior Project Engineer/Contract Provided start-up services for a meltblown production line. Successfully started up line and customized system at plants request. Minimal control system was improved by adding automatic start-up sequence, quality reports, security, audible alarms, and enhanced recipe functionality. System included Allen-Bradley PLCs, Flex I/O, RSView, and Controlnet. Allen-Bradley 160 series, 1336 Plus, and Force Drives were used

5/98 -12/98 J & M Laboratories Dawsonville, GA Electrical Engineer Completely specify, document, and implement a control system for a new product line from the ground up. Defined the control system using P & I drawings, interlock lists, and start-up/shutdown sequence definitions. Programmed an Allen- Bradley PLC5 with RSView as the operator interface

5/97 - 5/98 Lashley, Cohen and Associates Lawrenceville, GA Project Engineer Successfully executed more than 50 service calls where troubleshooting skills were challenged. Also executed many small projects using Allen-Bradley Micrologix, SLC500, and PLC5 series controllers, Allen-Bradley Panelviews, and 1336 AC Drives

3/96 - 5/97 MDCS, Inc./TAVA Technologies Atlanta, GA Senior Project Engineer Implemented control systems using the Allen-Bradley SLC series, PLC5 series, 1391 servo amplifiers, IMC S-Class servo controller, IMC 121 Servo controller, 1395 DC Drives, 1333 AC Drives, 1305 AC Drives. Wonderware, Winview, and Visual Basic were used for computer based MMI solutions

7/95 - 3/96 Hampton-Tilley Associates Norcross, GA Project Engineer Responsible for control system design and implementation using a variety of hardware and software including Allen- Bradley SLC500, PLC5,and TI405/505 PLCs and Allen-Bradley 1305 and 1336 AC Drives

10/94 - 7/95 Interface Flooring Systems, Inc. LaGrange, GA Project Engineer Planned, coordinated and directed all aspects of capital projects. Projects included installing new production lines and additions to existing lines. Project work included specifying/purchasing materials, power distribution, panel layouts, PLC programming, startup and operator training

11/92 - 8/94 Lockwood Greene Engineers, Inc. Atlanta, GA Senior Systems Designer Specified and documented instrumentation for process control. Developed software tools using Dbase IV to automate the creation of loop sheets and instrument specs. Train, execute project, and work start-up for a Fisher Provox DCS system. I was part of a team of 8 engineers that configured, programmed, tested, and installed the system for a 2000 I/O point spandex plant

4/92 - 11/92 W.D. Walker and Associates Athens, GA Project Engineer Designed and implemented control systems using Allen-Bradley PLC hardware. Significant project was the control system for an entire chemical plant which included 3 batch reactors and approximately 800 I/O points

12/90 - 4/92 PC Design/Hampton-Tilley Associates Forest Park, GA Project Engineer Installed a Taylor Mod300 DCS system in a chemical plant. I was the primary programmer for a system that had 2 batch reactors and a continuous reactor. I executed the entire project from programming through start-up, customer training and the first few months of production. This plant made different kinds of surfactants

6/89 - 12/90 Combustion Engineering/ABB Process Automation, Inc. Norcross, GA Design Engineer Programmed and installed the Taylor Mod300 DCS in pulp mills.I was one member of a team of 10 engineers that configured, programmed, and started up the DCS. I was a programmer for this company and worked about 4 pulp mill start-ups with this system during my time there. I became proficient enough to be sent on service calls to our customers near the end of my stay. I was also trained on the ABB master DCS system