Jeffery — Development Flight Center Sr. Quality Engineer Process

04-01/- 7/03 GKN Westland Aerospace, Alabama / Missouri Program Manager IPT Lead Engineer - Eclipse 500 detail components New Proto type FAR 23 Type Certification Program, Pratt Whitney engine details and Sikorsky helicopter components GE/Gen-x Fan cases and stator assembly. Also driveline division support for PLC automotive industry - Manufacturing Engineering, Quality engineering, re-design coordination efforts and certification process and produce ability with team customer (IPT) - First budget and work force scheduling and supervision aspects - FAA Activity and Customer contact - Lean manufacturing, 6S. CAPA plans Airbus MRB engineer for A330,340 and A380. - liaison to BAE cause and corrective actions and Non-conformances

Tech-Staff 1996 - 1997 BALIMOY MANUFACTURING, Tampa, FL - Quality Inspection Manager//Quality Chief - ISO/QS9000 Implementation PPAPS / FEMAS for machined items as to truck housings, pistons and transmission details for Tier 1 automotive supplier and military ammunitions. - Contract review and implementation, planning, first article, inspection support Prepare company and implement procedures for QS-9000 Certification Successful certification

1992 - 4/93 PEC VIKTRON, Orlando, FL Quality Lead /Shift Supervisor - Supervision final quality and test operations. - Initially set off-shift operation schedule for production, Production flow of the test and quality department. From bare material through drilling and plating operations through test operations (Isolation and Continuity testing) to Final inspection and buy-off. And rework items. - Military and automotive components under guidelines of ISO 9000/ QS9000. IPC 600,610,620 MARTIN MARIETTA ORLANDO AEROSPACE ELECTRONICS& MISSILES, Orlando, FL1986 - 1992 - Quality Engineering / Quality Off Shift Supervision / Quality - Quality Inspection team for the Patriot, TADS (AH-64), Hellfire, Copperhead and Lantrin projects and Ground support equipment for Government Defense items. - Inspect to all MIL-FED specs and Requirements of Contract Spec. Functions as to PMR, inspection to all procedures and Mil-Spec requirements. Directed all assemblies from in process to final Build DD250 all floor support Issues, DCMA submittals. CERTIFICATIONS-AND-STRONG FAMILARIZATION OF ALL RELATED SPECIFICATIONS Hand Solder Mil-S 45743 E amend #2 Mil-S454 reg.5 MIL- 2000 A Harness and Cable D68399608-Mis-22129 1910. 1200 level 3 HaZ-com Internal Auditor ISO 9000-9001:2008/ QS9000-TS16949/AS9100, ISO 13485:2004 ASQ/CQE, CQI, #01140962 CQA.CQM IPC-600, IPC-610.620 JSTD-001 COMMERCIAL SOLDER STDS. QCS-320-QCS-001 Lockheed Martin SURVEY/AUDITS QUALITY SYSTEMS MIL-I45208 A QUALITY SYSTEMS REQ. NDTS 1500-, 1501&150 ISO 9000: 2008, QS9000, AS9100 rev C Quality Management systems NON-DESTRUCTIVE TESTING MIL-H-6088 G Heat treating of metals Passivation/ Annealing MIL-STD-45662 / ANSI Z541 Lean Manufacturing Practices 6S, Value stream process mapping, Metrology Calibration

Sikorsky Aircraft Corporation / UTC/ Pratt Whitney / Lockheed Martin Contracted 05-14 to 09/16 - Development Flight Center Sr. Quality Engineer Process and specification Audits for internal controls - Non - conformance validation and processing through MRB, develop tracking matrix on high driver activity and place into graph charts per area and build stages, Supplier performance and rating system. - Develop Business Unit Meetings with production manufacturing and engineering personnel to provide corrective action and disposition support for leaning out back log and continue process flow - Supplier Quality performance and corrective actions and support - Supplier Source / Supplier Quality Engineering, working with Suppliers of detail composites and composite bonded assemblies B/E Aerospace SPG Winston-Salem NC Sr. QE / Certification lead new product implementation Lead. (N.P.I) Certification - Lead engineering, Quality, Programs and Operations in system development for new program development/ implementation and FAA certifications as well as customer approvals. First Article approvals AS9102/ P.O.) - Coordinate and direct / train team in PPAP, PFEMA, DFEMA, process and work with Supply chain for all supplier coordination flow downs / requirements through Process approvals. ITT / Excels / Harris Corp. Geospatial systems Sr. Supplier Quality Engineer Clifton, NJ Contract - Perform FAI review on supplier audits for approval and validation - Perform mechanical inspection verification to assure compliance to all specifications prior to release to production or customer buy-off DD250 - Review non-conforming hardware and other MRB Associated items. - Sheet metal fabricated / formed details and assemblies, machined items, electronic components and assemblies, Software, hardware items to compliance

AAR Aero-structures and Interiors Clearwater, Fla implementation for - current Boeing Contract for A-10 Wedge assemblies. Review current processes and planning submittal of NCRMRB processing for customer Approvals. 01/11/2014 to 04/10/2014 - Lead Senior Program Quality Engineer (Contract) - Composite and metallic structure assemblies mfg. Support / training for MRB / Corrective Action

Supplier.C.Q.A. R Contracted Quality Assurance Representative. Hartford, CT 04/2011 to 08/2012 - Quality Assurance Rep for Pratt Whitney (C.Q.A.R) Provide Supply chain support for new supplier's and new product release throughout the South East region as supplier quality engineering rep - Work with Suppliers in developing and approval of PPAP'S, First Article reports to AS9102, perform F.A.I. verifications / dimensional inspections to P.O. and Engineering drawings per ANSI Y14.5. - Train supplier quality engineers (new hires) to Pratt Whitney's procedural requirements ASQR- 01 and methods of inspections to GD&T AS9102 - Pratt Whitney from process controls, first article lay out and approvals per AS9102, PPAP / PFEMA's of. Implementation and inspection results into data systems. - Audit processes to all ASQR-, AS91000 and P.O. requirements, process audits, on site reviews and train for future self-release DQR

12/10 to 12/31/2013 JPG Quality 1 st Inspection and Engineering /Supplier Support Owner / President / Lead Engineering - Support automotive/ aerospace and aviation with temp to perm and contracted labor needs Support Automotive in containment needs/supplier issues/ corrective actions and implementations, new program set up and launch. APQP /PPAP/PFEMA/DFEMA - Review and implementation as needed. Perform internal audits and capability approvals. - Procurement support Quality engineering for product review/ tooling /planning and AS9100 Compliance / Supplier QA support on site review processes, run at rate - capabilities, core competency, QMS system. Interim QA Management, aide in interviewing processes, recruitment. Quest Global / Primary supplier to Pratt Whitney UTC

229, Tallassee Alabama Programs as Lockheed Martin, Sikorsky, Honda Jet, Programs, Supplier Quality., FAA rep 11/04 to 12/10 - Direct contact of support level for all customers for programs and Lead I.P.T. meetings. For all new programs - Interface with FAA offices as required M.I.D.O. / A.C.O. for TC programs of detail composite and assemblies for type certification programs - Provide direction and guidance to QA staff which includes Quality program managers as well as Sr. Level QE support. - Manage Supplier Quality Engineers and Supply Chain items and Inspection personnel (Receiving inspection) - Direct all MRB activity and MRB board items for customer submittal and corrective actions associated with. - Implement customer requirements and internal requirements with in guide lines of ISO- 9000:2000 and AS9100, NADCAP. Review and implement Process planning and Quality inspection planning methods as well as all procedures feeding throughout contract requirements. - Set up and direct all implementation activity for Oregon Production Management system for Self- release authorization. - Guide and lead New Program start up projects. - Delegate for Honda Jet program for all sourcing activity for Type Certification activity. - Supplier conformity and supplier management within all guide lines to 8110.4c Chapter 5, AS9100, ISO 9000, 9001, 14001

7/03-07/04 ATK Space Systems, Iuka Mississippi Lead Process Quality engineer /MRB Engineer of Composite Assemblies (Contract) - Delta 2,3,4 and LMCO layup planning and rework planning for details and final assembly of composite casings for payload rockets all Composite assemblies - Cause and corrective actions manual lay ups action plans, preventive action plans, dispositioning of non-conforming items. Train engineering and Quality Engineering staff on processes - MRB rework and repair planning and procedures and present through Boeing leadership/management teams and Gov't approval DCMA, DOD. - Global Hawk R&D start up project in conjunction with Aurora Flight Sciences for wing assemblies and V-Tail assemblies IPT engineering and Liaison - Liaison engineering with between prime and sub-tier for produce ability Deputy Director of Quality / New Programs GKN Aerospace / Driveline division

Sino Swearingen Aircraft Corp., San Antonio, TX, TAC Nationwide staffing 3/00 -4/01 Lead Quality certification engineering. (Contract) - Planning review lead and Liaison, FAR 23 Type Certification Program. - Aircraft assembly from detail and sub-assemblies and aircraft installations - FAA conformity activities and preparation - DAR Liaison and FAA Non-conformance activities - Planning review and red lining activities Drawing review - Tooling review and calibration, Flight test calibration. - Non-conformance activities. Supplier corrective action

Hi-Stat Manufacturing Inc. Sarasota, FL 10/99 - 3/00 Sr. Quality Engineer / Work Cell for new product set-up - Tier 1 automotive company supplier for Delphi Speed sensor "B' division. QS 9000 / TS-16949 - Injection molding (plastics) from In-process too final build - PPAPS, FEMAS, Gage R&R, Cap studies, Calibration, continuous improvement - Corrective actions, Fault verification, Warranty issues, preventive actions. inspection support - Customer Liaison for Ford, Nissan, Delphi, Toyota

5/99 - 10/99 NORTHROP GRUMMAN, Milledgeville, GA - (Contracted) Quality Engineering/ Supplier Quality - Composite details for Boeing 757,767,777 Crown skins, Military projects - Corrective actions, Non-conformance activity - First Article inspection, Final sell off

1/98 - 4/99 LOCKHEED-MARTIN AEROSTRUCTURES, Pinellas Park, FL, (Contracted) Quality Engineer / Manufacturing Engineering Supplier Quality, - F-16, C-130, F-18, F-22 detail fabrication from forming, machining, routers, punch press operations, heat treating. Sheet metal forming and Hydro Forming Planning review and inspection operation implementation First Article inspection and verification and AMMC support Manufacturing Liaison support and MRB submittals. - Supplier Audits to QCS-001 Requirements. - NDT, NDI requirements, Flu pen and conductivity

4/94 - 4/96 NORRIS PRECISION MANUFACTURING, Clearwater, FL - Quality Manager/Q.E (Machined Aerospace and Automotive products) - Contract Review, PMR, and non-conforming activity. - Inspection requirement planning, in-process inspections, audits, support floor inspection activities. - First article inspection, Final sell off Customer contact of Martin Marietta, Textron fuel systems, Allied Signal and Delphi /GM/ caterpillar

4/93- 11/93 Jabil Circuit, Clearwater, Fla. Quality Engineer / Inspector (contract) - Printed circuit board assemblies for new product lines as to Dell, Sun micro-systems. - Surface mount Technology / wave solder - Implement standards to IPC-600,610 and Process control monitoring under statistical control Fault verifications and continuous improvement activities, - Quality inspection training, schedule inspection force and labor needs