Brian — Robot Programmer

Debug with controls using ladder logic with Allen Bradley PLC 500, 5000.

Glass cell at BMW assembly with the Kuka KRC2.

Pick and place applications in bodyshop, assemby Palletizing applications

Worked with many robotic applications including, material handling, self piercing rivet guns, plasma cutting, laser cutting, sealant, mig, spot and laser welding

Application of sealer using the SCA dispense systems with ABB IRC5 and Fanuc.

Stud welding and nut welding with Kuka KRC1, KRC2, and ABB IRC5.

Installation, commissioning and programming of door lines for Volvo Truck at Drive Automotive. Greenville SC. Installation, commissioning and programming of Mercedes 296,294 door lines. Kamtek Birmingham AL

BMW Paint Shop - sealer and vision system production support of new cell. FANUC robots doing topdown PVC seam sealing with vision in one cell and underbody PVC seam sealing with vision in the second cell.

- Start up, programming, and debugging of automated robotic systems. - Worked with Kuka KRC2 with Ford/ Brazil, Mercedes Benz, BMW and with Tesla Motors. Installed body shop at Ford motor company in Comasarri Brazil, Mercedes Benz in Alabama and BMW in South Carolina. Applications included spot welding, material handling, stud welding and nut welding with Kuka KRC1, KRC2, and ABBIRC5. - Worked as Robotic Specialist for BMW in the paint shop. Worked toward production improvement, employee training on robotics, and installation of new models. Application of sealer using the SCA dispense systems with ABBIRC5 and Fanuc. Installed the INOS vision system for windshield and back glass cell at BMW assembly with the Kuka KRC2. Installed new body shop lines for the current models for BMW with ABBIRC5, S4 and S4Cplus. - Managed and installed battery assembly line at Tesla motors. Worked with customer to develop timelines and manpower needs. Responsible for coordinating all project needs and deadlines. Scheduled trades and manpower such and mechanical, electrical, robotics and controls. Trouble shooting to meet timelines. - Application included INOS and cognex in-sight vision systems, AtlasCopco nut runners, and nordson dispense units both sealer and hot melt with Kuka KRC2. - Assisted in program and code development for the Battery assembly line at Tesla motors for the Kuka KRC2 - Managed the Cadillac CTS Underbody line for Challenge Motors. Worked along with customer to meet manpower and product needs. Scheduled and managed manpower for electrical, mechanical, robotics and controls. Trouble shooting to meet timelines. - Worked with many robotic applications including, material handling, self piercing rivet guns, plasma cutting, laser cutting, sealant, mig, spot and laser welding and Fanuc IR vision along with Kuka Cognex and INOS vision systems - Experience with ABB controllers such as the S3, S4, S4C, S4Cplus and IRC5. Including electrical debugging and wiring using schematics. - Experience with Fanuc RJ3 and RJ4, Nachi AX, AR, AW, Kuka KRC1 and KRC2 also Motoman  Maintain a positive company image and relationship in the city, community, state and nation. - Supervised professional, technical and support staff on a day-to-day bases, including determining workloads and schedules, implementing and interpreting policies and procedures. - Preparing project plans for automated systems, wrote and reported issues from customer meetings, technical reviews and customer requirements. Identified customer issues and requirements. - Have managed a large and small group of colleagues to achieve the same goals to get a project done on time

- Start up, programming, and debugging of automated robotic systems. - Worked with many robotic applications including, material handling, self piercing rivet guns, plasma cutting, laser cutting, sealant, mig, spot and laser welding. - Experience with ABB controllers such as the S3, S4, S4C, S4Cplus and IRC5. Including electrical debugging and wiring using schematics. - Experience with Fanuc RJ3 and RJ4, Nachi AX, AR, AW, Kuka KRC1 and KRC2 also Motoman  Maintain a positive company image and relationship in the city, community, state and nation. - Supervised professional, technical and support staff on a day-to-day bases, including determining workloads and schedules, implementing and interpreting policies and procedures. - Preparing project plans for automated systems, wrote and reported issues from customer meetings, technical reviews and customer requirements. Identified customer issues and requirements. - Have managed a large and small group of colleagues to achieve the same goals to get a project done on time. - Debug with controls using ladder logic with Allen Bradley PLC 500, 5000.

- Start up, programming, and debugging of automated robotic systems. - Worked with many robotic applications including, material handling, self piercing rivet guns, sealant, mig, spot welding. - Experience with ABB controllers such as the S3, S4, S4C, S4Cplus and IRC5. Including electrical debugging and wiring using schematics. - Experience with Fanuc RJ3 and RJ4, Kuka KRC1 and KRC2 also Motoman - Maintain a positive company image and relationship in the city, community, state and nation. - Supervised professional, technical and support staff on a day-to-day bases, including determining workloads and schedules, implementing and interpreting policies and procedures. - Preparing project plans for automated systems, wrote and reported issues from customer meetings, technical reviews and customer requirements. Identified customer issues and requirements. - Debug with controls using ladder logic with Allen Bradley PLC 500, 5000.

- Start up, programming, and debugging of automated robotic systems. - Worked with many robotic applications including, material handling, sealant, mig and spot welding. - Experience with, Kuka KRC1 and KRC2 - Maintain a positive company image and relationship in the city, community, state and nation. - Preparing project plans for automated systems, wrote and reported issues from customer meetings, technical reviews and customer requirements. Identified customer issues and requirements. - Debug with controls using ladder logic with Allen Bradley PLC 500, 5000.