Jose — Robot Programmer

CERTIFICATION VASS KUKA VKRC4 AUDI

CERTIFICATION VASS 6 FANUC VOLKSWAGEN

Maintenance support for troubleshooting of kawasaki robots on RIVIAN´S EDV and R1 production lines at Normal Illinoisplant.

JANUARY - JULY 2026 Commissioning and programming of KUKA robots KR5 in TESLA Reno,Nevada in project A431 in MNL and UBM lines for SEMI production. SEPTEMBER 2025 - JANUARY 2026 Commissioning and programming of KUKA robots KR5 in TESLA Austin in project FRS2.

(FREELANCE) Commissioning and programming of KUKA robots VKR5 in BMW Spartanburg in project G6x FIT Integration and G6x Tu ren, SWv & MZ.

(FREELANCE) Commissioning and programming of Fanuc robots on GM Bay City Michigan.

(FREELANCE) Maintenance support at Mercedes Benz Vans in Charleston S C, support in maintenance tasks and processes in production lines.

Robot programming at GM Springhill, Tennessee in Fullstack project in battery assembly line, debug and integration with fanuc robots

Production support at magna cosma body assembly, support in maintenance tasks and processes in production lines.

JULY 2021-DECEMBER 2022 Support and Validation in safety and programming of Fanuc robots according to the RIVIAN programming standard at the Normal Illinois plant. FEBRUARY 2023-APRIL 2023 Program KUKA and FANUC robots in integrationof new TESLA HLND model at Fremont California plant. APRIL 2023-SEPTEMBER 2023 Maintenance support for troubleshooting of fanuc and kawasaki robots on RIVIAN´S EDV and R1 production lines at Normal Illinoisplant.

(FREELANCE) Programming of Kuka robots KRC4 in new line of transmissions, in DEIMLER Detroit for new proyect with KUKA Germany.

(FREELANCE) Reprogramming and integration of Kuka robots VKRC4 in VW de Mexico for production of new model TAOS. Reprogramming and integration of Kuka robots VKRC2 and VKRC4 in line of bonet and start-up and programming of FANUC robots in different areas, in VW de Mexico for production of new model Jetta A-7

(FREELANCE) During my stay in this Company I provide my Services as robot programmer participating in various projects for different companies. VW Mexico Project: Jetta GP A-6 integration AUDI Mexico Project: Audi Q5 VW Chattanooga Project: Intergracion Passat GP Gestam Plant 2 Puebla Project: Audi Q5 subassemblies

Start-up and programming of robots, participating in various projects for different companies. VW Shanghai Project: Tiguan AUDI Changchun Project: Audi A4, Audi Q3 and Audi Q5 VW de Mexico Project: GOLF A-7 VW Emden Proyecto: Past

(FREELANCE) Programming and start-up of KUKA VKRC2 robots in VW de Mexico for the project VW361 Kernfabrik and Wetsfabrik (Jetta A-6)

(FREELANCE) Programming and start-up of KUKA VKRC2 robots, VW Mexico in the area of doors, and tailgates for the project VW361 Kernfabrik

(FREELANCE) Programming and start-up of KUKA robots VKRC2 in VW Mexico in the area of underbody for the project VW361 Kernfabrik

(FREELANCE) November 2003 – August 2009 ACTIVITIES DEVELOPED: NOVEMBER 2008/MARCH 2009 Start-up of ROBOT´S FANUC R-J3ic at TATA MOTORS MICROBUS project. In UTTARANCHAL RUDRAPUR INDIA. For resistance welding process. May 2008/August 2008 Start-up of ROBOT´S FANUC R-J3ic in EBZ (formerly THYSSENKRUPP DRAUZ NOTHELFER) MICROBUS RAVENSBURG Germany project for resistance welding process. FEBRUARY 2008/MAY 2008 Start-up of ROBOT´S FANUC R-J3ic at Tata MOTORS Tata AC Project. In UTTARANCHAL RUDRAPUR INDIA. For roller hemming process. OCTOBER 2007/NOVEMBER 2007 Commissioning of ROBOT´S FANUC R-J3ic at THYSSENKRUPP DRAUZ NOTHELFER in RAVEBSBURG Germany Tata AC Project for Tata MOTORS in INDIA. For roller hemming process. JULY 2007/AUGUST 2007 Revision of programs and documentation of modified and new ROBOTS by integration of the VARIANT model in the different areas involved for this process, this work was performed at the request for electric planning of VOLKSWAGEN of Mexico FEBRUARY 2007/JUNE 2007 Programming of ROBOTS of different brands and applications in Project "Center of Robotic Technological competences (CCTR) in Training School of VOLKSWAGEN of Mexico. Kuka VKRC1 ROBOT is a MAG welding application. Kuka ROBOT VKRC2 application of resistance welding. ROBOT SEF VRS2 programming sequences for drawing. FANUC RJ3iC M16iB ROBOT Bolt welding application. ROBOT NX100 HP20 application of seal. ROBOT ABB IRC5 IRB2400 Handling tool. December 2006/January 2007 Assembly, installation and commissioning of NIMAK Gun with SERVOMOTOR and medium frequency welding equipment in the AREA of Pillar B VW.DE Mexico, these works were carried out together with personnel maintenance of VW. July - September 2006 Modifications in 12 robots and integration of 2 robots in rear cover and front cover of Jetta A-4 in ship 25 of VOLKSWAGEN Mexico for production of the model Jetta GP, in this project I was carried out the reprogramming and adaptation of the installations to be able to produce the Two models mentioned above, were integrated into these areas MIG and MAG welding equipment, as well as a resistance welding gun's. These works are carried out with the VW company. BRAUNSCHWEIG MASCHINENBAU AG. January - June of 2006 Modification and updating of information of 98 robots of the AREA of body sides by modifications and integration of new robots and devices for production of the VARIANT model in VOLKSWAGEN. Support for translation of SOFTWARE S7 German to Spanish by modifications and integration of equipment for production of model VARIANT in VW. Mexico. Assembly, installation and commissioning of SERVO gun NIMAK in area of recovery UB-2 in hall 8 of VW. gave training to personnel of production and maintenance, for CONTROL, operation and solution of problems with this equipment, this work was carried out together With VW personnel of VW Mexico. November 2005 - January 2006 Reprogramming of 1 Kuka robot by integration of 4 intermediate stations to store MATERIAL and integration of a handling robot more for parts transport, by modifications for production of the model VARIANT in UB-1 (Complete platform assembly, system of Storage of MATERIAL in intermediate devices) in ship 8 of VOLKSWAGEN of Mexico. Reprogramming of 3 KUKA ROBOTS for relocation and integration of 4 more stations, these modifications were made in the AREA of under body, for production of the VARIANT model. These jobs were done with the VW company. BRAUNSCHWEIG AG. November - December 2004 Programming of 5 KUKA VKRC1 ROBOTS recovered for the application of TUCKER bolts on ship 8 UB1 station 1020 front and rear floor assembly for JETTA A-4. Reprogramming of 12 Kuka ROBOTS VKRC1 by relocating front doors from the JETTA A-4 from nave 2 to nave 25 at VOLKSWAGEN de MÉXICO. As well as programming and adaptation of process by the elimination of 4 ROBOTS. December 2003 - April 2005 Programming of Robots VKR C2 in VOLKSWAGEN of Mexico for the project of rear cover and front cover of the A-5 BORA, in this project make the start up of 19 robots used for the assembly of the parts mentioned above, in this Project were used CLINCH process, glue and handling tool. Training is taught for production personnel and maintenance, for CONTROL, operation and troubleshooting in these areas

optimization of resistance welding process in manual and automatic gun.

Preventive and corrective maintenance in the press AREA of this company. of the 28th of SEP. As of October 2, 1998 make a visit to the company "KARMAX HEAVY stamping" in the city of MILTON ONTARIO, CANADA to know automation system and operation of line of automated presses with ROBOTS. Also participating in a project of automated presses with robots in AUTOTEK, working in assembly, installation and start-up of robots with the company MASSIV DIE FORM belonging to the MAGNA group. During my stay in this company I received the following courses: ELECTRICAL MAINTENANCE AND BASIC PROGRAMMING OF THE FANUC S420IF R-J2 HANDLING TOOL 4.30-1 IN FANUC ROBOTICS FACILITIES IN THE CITY OF AGUASCALIENTES, MEX. PROGRAMMING AND USE OF RSLOGIX 500 IN THE COMPANY'S FACILITIES.

KUKA robot Development at VOLKSWAGEN de MEXICO NAVE 51 in PÌSO Assembly area for the NEW BEETLE project

SUPERVISOR in the AREA of production in assemblies, welding. Participating in the work of assembly, commissioning and programming of ABB ROBOTS in the CROSS MEMBER PL42 project, working with MILLER and NIMAK welding equipment