Arturo — Consultant (Supervisor)

Project: Implementation of the Project to reduce Leakage and improve Non-revenue Water in the EPS (Sanitation service provider company) Grau, Piura, PERU: Development of detailed engineering. Supply and installation of field measurement equipment such as level sensors, datalogger, RTU, flow meters. Installation of the LEAKS solution (DMAs Monitoring), which will verify the analysis, monitoring and optimization of leaks with all its tools. Installation of the Smart SCADA, which includes all the components for the correct operation, such as graphs, trends, reports, database, etc. Installation of Smart Metering, to verify consumption analysis. Operation of the new system implemented for a period of 6 months. The supervision includes the entire integral cycle of the project, such as engineering development, revision of technical sheets, installation, commissioning, training, and operation. Project: Improvement and Optimization of the Operation of the Supply Network of Piura, through the use of Artificial Intelligence and Machine Learning technologies in the EPS (Sanitation service provider company) Grau – Piura - PERU. Develop the hydraulic modeling of the drinking water supply system using advanced algorithms and machine learning for the identification of complex patterns by reviewing the data obtained, as well as for the prediction of future patterns and the automatic improvement of the systems, without human intervention. The success that will be achieved in the 2 projects will be replicated in other sanitation companies in Peru and Latin America with IDB financing.

Leader of SCADA systems development for Water Infrastructure, Oil & Gas, Manufacturing, Energy, and Renewables projects. Leader of Computerized Maintenance Management System (CMMS) development for drinking water and sewerage treatment plants.

Support as a Backstopping expert to the specialists of the different projects. Consulting Services for the Preparation of Feasibility Studies and Detailed Designs Environmental Sanitation Program for Lake Managua in the South Bank – Nicaragua. Studies and Designs for the Improvement of the Potable Water and Sanitary Sewerage System of the City of San Jorge and Buenos Aires" CABEI CPI No. 014-2019 – Nicaragua. Feasibility study for water supply in the volcanic region of Rwanda. Business development of new projects in the water and sanitation sector: Review and evaluation of the annual project portfolio of sanitation companies from Latin American countries to present technical proposals during the bidding process. Participation in the development of the methodologies that are included in the technical proposals for tenders with financing from international organizations such as KFW, CAF, IDB, AFD and the World Bank.

Responsible for providing adequate and timely advice to general management, managers and senior management in the specialized aspects of planning of drinking water and sewerage systems, in institutional planning, in the management of Information and communication technologies, in research, innovation and technological development, in investment projects (with international loan, own resources and PPP) and their respective evaluation of pre-investment studies. The most important responsibilities were: Preparation / prioritization / supervision of the Investment Plan for all of Sedapal (with a planning of 5.3 billion dollars for the five-year period 2017-2021). Preparation / updating of the Master Plan. Leadership of the elaboration of water security Technical supervision of consultancies with the World Bank such as the new commercial management system, new standardized SCADA system, and others. Responsible for consultancies such as updating the demand, updating the Cadastre, analysis and reduction of leaks, evaluation of the institutional organic structure, non-conventional supply system (Water is life) and others. Technical and financial evaluation of each of the investment plan projects to determine their execution with international loans, own resources or through PPPs. Participation in the technical supervision of the execution of the Provisur APP. Prioritization of the list of projects that would be managed as PPP, after evaluation with consulting studies. Responsible of project: Implementation of the Maintenance Management system with SAP (3.5 million dollars, 09 months). Scope: 1,000 Pumping Stations distributed by the City of Lima (wells, pumping chambers and reservoirs). Preventive and corrective maintenance. 50 units on average for each Station: pumps, motor, transformers, capacitor bank, chlorine doser, electrical panels for starting pumps, control and telecommunications panels, PLC, SCADA (at Hardware and software level), instrumentation (chlorine residual, pH, turbidity, flowmeter, level, pressure, etc). Integration with SAP modules: Logistics, human resources, and costs ABC, and the SCADA and GIS for exchanging information online. The most important research projects were: Use of drying technology for the processing of organic sludge and fuel obtained from the dried sludge. Implementation of a microturbine in the pipes for electricity generation for use in the same drinking water treatment plant. Evaluation of the application of aluminum polychloride for the removal of organic matter. Heavy metal oxidation of catchment water with compressed air in the pretreatment stage. Recovery of groundwater quality from inoperative wells by reverse osmosis. Evaluation and application of ozone (air oxygen) as a disinfectant in the pre-treatment stage. Air flotation system (microbubble) to separate suspended solids in waste plants. Evaluation and application of electrochlorination for the disinfection of drinking water. Characterization and reuse of sludge from drinking water treatment plants - La Atarjea. Characterization, treatment and reuse of sewage sludge and on-site sanitation systems.

Responsible for the maintenance, support and development of all Sedapal IT systems throughout the company. Responsible for the supervision, control and monitoring of all automation projects throughout the Sedapal company. Responsible for the energy efficiency of automation and IT projects at the company-wide level. (at least supervise 05 contracts for each year related to energy efficiency in automation projects). Responsible for the WaterGEMS and WaterCAD software. Responsible for IT projects: SAP, Management Information System, Commercial Management System, Logistics Management System, Financial Management System, GIS, WWTP SCADA, Plant SCADA and Distribution SCADA. Supervisor of the reception of the automation part (SCADA, instrumentation, PLC's, electrical and control boards) of the construction of the PARIACHI Wastewater Treatment Plant.

Supervision of Projects with Pumping Stations (wells, tanks and reservoirs). Responsible for the operation of the SCADA System. Responsible for the energy efficiency of the 900 pumping stations (wells, tanks and reservoirs). Responsible for the maintenance and calibration of the macrometers of the Sectors. Responsible for the maintenance of the Automated Pumping Stations and unaccounted for water. Supervisor of the automation part (SCADA, instrumentation, PLC's, electrical and control boards) of the construction of the San Bartolo Wastewater Treatment Plant. Supervisor of the automation part (SCADA, instrumentation, PLC's, electrical and control panels) of the construction of the San Juan Wastewater Treatment Plant.

Consultancy for the supervision and revision of the new SCADA implemented in the Pariachi WWTP Project. Consultancy for the revision of the automation part of the Project "Rehabilitation and improvement of the Decanters and Filters of Plant 1 and 2".

Responsible for the execution of projects in the sanitation, energy, mining and oil sector, among the most important the following projects: TABOADA WASTEWATER TREATMENT PLANT ($ 189'081,374.00 dollars): Medium voltage panels and battery bank for Substations SW-28-01 and SW-15-01. CCM's and Medium Voltage Variators. CCM's with solid state starters and Low Voltage sectionable panel, Control panels with PLC's and SCADA system. PARIACHI WASTEWATER TREATMENT PLANT ($ 48'703,362.00 Dollars): CCM's 1000A and 2500A, and Compensation Banks of 1330KVA, 2700 KVA. Control boards with PLC's and SCADA System and Low Voltage boards. CASAGRANDE: Capacitor Banks of 1000KVAR / 460VC. Medium Voltage CCMs with solid state starters. 75KA, 5000A, 440VAC Intelligent Distribution Control Center. Intelligent Motor Control Center with Soft Starter. ELECTROSUR: MCSET model arrival cells with Coupling Cells. LA ARENA: Boards for transferring Generator Sets with masterpac switch, rectifiers and batteries. SANTOS CMI INC (ENERSUR): Medium and low voltage cells of the ILO PEAKY Project.

Jebel Hasouna – Jeffra System Tripoli Tee to Bir Al Tirfas Conveyance Pipeline (TAT). 24 Turnouts Control and Communication System Works and Services for Al Nahr Company (ANC) in Libya in the frame of the Great Man Made River Project (8,9M EUR) Ghadames – Zwara – Al Zawiyah Water System (Phase IV). Permanent Control and Communication system (PCCS) Work and Services for Al Nahr Company (ANC) in Libya in the frame of the Great Man Made River Project (26,6M EUR) Greater Amman SCADA System for Water Authority of Jordan and Miyahuna (Jordan Water Company) as final user (4MEUR) Water SCADA System, GTC/16/2003 for Qatar General Electricity & Water Cooperation KAHRAMAA (11,2MEUR) Bursa Wastewater Project BURSU13- Water Supply SCADA System for Bursa Water and Sewerage Administration General Directorate of Turkey (3,4M EUR)

Acquisition and installation of satellite communication systems (Inmarsat terminals with bgan technology) between the control stations and the Scada control center - Tablachaca Corrective maintenance of radial and satellite communication goes improved subsystem – Tablachaca dam. Maintenance of the Scada Oasys system called modern hydrometeorological system. consultancy for the preparation of the technical file for the modernization of the hydrometeorological scada system - Tablachaca dam and integration of control stations Hueghue, Yanacocha Palcán, Huacracocha sw lake Junín and Huacracocha sub-basin Huari. Acquisition and installation of equipment for the Casapatos hydrometric station. Integration of the PLC's network in modbus TCP communication from the filters of plant 1 to the Scada Oasys of the la Atarjea plants. Maintenance of the modernized hydrometeorological network of the rio Mantaro basin. Consulting: review of the automation part of the project: rehabilitation and improvement of the decanters of plant no. 1 - La Atarjea. Diagnosis of the Scada hydrometeorological system of the Tablachaca dam. "Programming of PLC's for the implementation of communication via GOES of the hydrotelemetric stations of Yuracmayo, Huasca, Sacsa, entrance Tunel Trasandino and Milloc", for the control, operation and maintenance of the five hydrometeorological stations of Edegel. Project for the maintenance and optimization of the electrical installations of the la Atarjea plants. Diagnosis and commissioning of the radio communication system between the improved station and the Tablachaca control center (Scada system). Scada software maintenance for the Tablachaca hydrometeorological control center. implementation and support of the experimental operation of the project for the "modernization of the hydrometeorological system and the control system of the regulated lagoons of the Mantaro de Electroperú hydroelectric complex (for 7 years)", included the Scada Oasys and 45 remote stations. Project implementation: "satellite supervision system of hydrotelectric stations for Edegel".

Responsible for the different research studies to improve the energy efficiency of the plant, the quality control of drinking water, reduction of water leaks, optimization of the maintenance management and automation of the dosing of chlorine and different chemical reagents. Administrator of the Scada OASyS and the MAXIMUM maintenance management software for the La Atarjea Plants. Supervision (of the electrical, instrumentation, automation and SCADA part) of the project: Implementation of the Maintenance Management system of the La Atarjea Plants with MAXIMO (2.8 million dollars, 01 year). Scope: All processes (from the collection of water in the river to its distribution to the City of Lima) of the La Atarjea drinking water treatment plant (Production of 24 m3 / sec). Preventive, corrective and predictive maintenance. 5,000 Plant equipments were integrated into this system: pumps, motor, control and isolation valves, tanks, piping, chlorine dispensers and different reagents / coagulants, electrical substations, transformers, circuit breakers, chlorine balances, UPS, variable speed drives, solid state starters, electrical control and communications panels, communication boards, PLCs, SCADA (at Hardware and software level), instrumentation (residual chlorine, pH, turbidity, flow meter, level, pressure, etc). Integration with the SAP logistics system, with the Plant SCADA and the GIS, for the exchange of information online. Internal auditor of the Integrated Management System (ISO 9001, ISO 14001 and OSHAS 18001) and the energy efficiency of the Plants as declared in the ISO. Automation and SCADA Systems Instructor. Responsible for the SGI-Quality and Environment of the Plants. Responsible for the planning, development and control of preventive, corrective and predictive maintenance programs for electrical, electronic, instrumentation and Plant Scada. Responsible for reducing the demand for water at the La Atarjea drinking water treatment plants. Responsible for developing and executing investment projects, technological innovation in the different processes of the Plants. Responsible for preparing the annual budget for investments, purchases and services. Responsible for the development of automation project studies.

Responsible for the execution of the planning, development and control of preventive, corrective and predictive maintenance programs (procedure and instruction) of the electrical, electronic, instrumentation and SCADA systems of the "El Atarjea" SEDAPAL water treatment plants.

Project: Automation of drinking water treatment plants "El Atarjea" of SEDAPAL, included: The complete design and engineering, manufacturing, supply, installation and assembly, testing and commissioning, one year of operation and maintenance - and training, for a modern Control and Communication System for the supply of water to the city of Lima. This included SCADA Oasys, PLC, electrical panels, transformers, medium and low voltage, field instrumentation and communication.

In charge of the execution of the planning, development and control of the preventive, corrective and predictive maintenance programs (procedure and instruction) of the electrical, electronic, instrumentation and SCADA systems of the "El Atarjea" water treatment plants. SEDAPAL.

Expected 2023