Pramod — Master of Science in Mechanical Engineering
Pramod
Industries Served
Work History on Automate America
Documents on File
Achievements
3
Tenure
Skills
Profile
Programming Skills 10
Path development, collision check, OFF-LINE programming, DCS, documetation
Roboguide, Off-Line programming, Very familiar with Fanuc programming language
Worked on Comau Robots for FCA_JL 2018. Created the Pathing, OLP Commands and Kinematics of the Tooling and downloading the programs.
Certified Professional in PTC Creo
Certified Professional in AutoCAD
Debubbing the PLC for Virtual Commissioning (Basics)
Maintenance Positions, Kinematics and the Documentation
Basics
Skilled Trades 5
Used the Lean Manufacturing tools like 5S, Kanban, Root Cause Analysis to minimize the defects and to improve the efficiency
Currently working on Siemens Process Simulate from last 2.5 years
Checking the Tooling with EOAT/Gripper to ensure zero collison
Worked on G Codes & M Codes of the CNC machines to see how the grooves can be made. Managed to troubleshoot the system whenever it is going out of the phase.
Managed the Weld Library and moving the welds in to different stations so that optimization takes place.
Software Competencies 5
Professional Competencies 13
Used to monitor how the Process or Sequencing takes place in Body in White (BIW) Assembly and make the necessary changes
Applications 12
Work Experience3
Automotive manufacturing process development including operator and robot cycle development. Manufacturing system improvement studies with a focus on resource utilization efficiency using Siemens Process Simulate Evaluating various Robotic Applications to validate Functionality, Sequence & Cycle Time Determining Tool/Robot placement, completing robot reach studies & cycle time analysis and making recommendations for design/system functionality while adhering to customer specifications
Produced the glass vials by minimizing the defects and maintained the production efficiency from 5 ml to 200 ml Planned manufacturing operations to facilitate production Details of Manufacturing (DOM) in support of customer requirements and delivery schedule Created and reviewed Failure Mode and Effects Analysis (FMEA) and prepared statistical and analytical summaries to support New Product Introduction (NPI) and Continuous Process Improvement (CPI) Created and maintained an accurate Bill of Material (BOM) requirements for DOM in support of customer requirements and delivery schedule Updated planning as required for all purchase order/customer engineering changes and for all method improvement/correction type changes
Developed the CNC program using G-CODES and M-codes regarding how the grooves were made in the rotor by soliciting the help of an experienced engineer and how they are placed in the rotor hub Managed to troubleshoot the system whenever it is going out of phase Developed the program on the basis of calculations such as Constant Surface Speed (CSS), Feed/Min, Feed/Rev, Time Required for one cut
Education / Training / Certificates3
Fundamentals of Control Systems
