Carmen — Startup

06/2017 - 11/2017 - CONTRACT POSITION Startup and commissioning on two Mitsubishi combined cycle gas turbines interfaced to an Emerson Ovation DCS control system. Project duties included Ovation logic checkout, graphics and data base configuration. Control logic configuration modifications and MODBUS configuration on the entire BOP system. TSP, DCS OWNERS ENGINEER

09/2016 - 02/2017 - CONTRACT POSITION Startup and commissioning on a Valmet tissue machine interfaced to a Valmet DNA Distributed control system. Project duties included logic functional testing, graphics, database and control logic configuration modifications for the BOP. BLUEWATER ENERGY SERVICES, DCS CONTROLS LEAD

05/2016 - 08/2016 - CONTRACT POSITION Startup and commissioning on a Shin Nippon Multi stage back pressure steam turbine and an Air-Cooled Condensing system interfaced into an ABB Infi-90/ABB 800XA controls system. This project is configured with 400 Modbus points and 200 hardwired points. A large portion of the controls are done via 5 unique Modbus links that are connected to the Siemens motor control center and the Shin Nippon steam turbine PLC. Scope of work included logic design, testing and modifications within the ABB function code logic controls and the HGS Modbus link software. Completed all loop checks and started up all equipment in Auto and Standby according to the contract specifications. UEI, INSTRUMENTATION & CONTROLS OWNERS ENGINEER

09/2015 - 02/2016 - CONTRACT POSITION New construction design and commissioning at DG Hunter on seven Wartsila spark ignition reciprocating engines. Wartsila model 20V34SG at 9MW each, using natural gas as the only fuel. Scope of work included startup and commissioning of the entire plant control system, multiple Modbus links, network communications and instrumentation using a Siemens S7-300 PLC

TDS, DCS COMMISSIONING ENGINEER 11/2013 - 01/2015 - CONTRACT POSITION New construction design and commissioning on a reclaimed water treatment facility project at Tampa Electric in Mulberry Florida. This project has a Densadeg water clarifier and a Doosan reverse osmosis system that is interfaced into an ABB SYMPHONY PLUS control system with 1800 hardwired I/O points

UEI, DCS OWNERS ENGINEER 01/2013 - 09/2013 - CONTRACT POSITION New construction biomass plant with a Siemens 100 MW steam turbine, Metso Hybex bubbling fluidized bed boiler, (BFB). DCS commissioning and instrumentation check out for all hardwired and Modbus communication link points. Commissioning included logic and graphic changes on the Metso DNA DCS system, as well as working with the instrumentation team to resolve I/O loops, logic and graphic issues

PRECISION RESOURCES, DCS OWNERS ENGINEER 07/2012 - 12/2012 - CONTRACT POSITION Repowering combined cycle project in San Jose California with four GE LM6000 gas turbines, Vogt HRSG's and one Mitsubishi reheat steam turbine. Responsibilities included management and commissioning of the Ovation DCS controls system for balance of plant, which was an Ovation platform version 3.3. Programming validation for the plant historian as well as all the OPC and Modbus links

PRECISION RESOURCES, DCS OWNERS ENGINEER 11/2011 - 05/2012 - CONTRACT POSITION New construction biomass plant with a Mitsubishi 115 MW steam turbine, Metso Hybex bubbling fluidized bed boiler, (BFB). DCS commissioning and loop check out of all hardwired and Modbus communication link points. Commissioning included logic and graphics changes on the Metso DNA DCS system, as well as working with the instrumentation team to resolve I/O loops, logic and graphics issues

BLACK & VEATCH CORP., DCS STARTUP ENGINEER 08/2008 - 08/2011 - DIRECT HIRE POSITION Project commissioning and startup on several combined cycle projects within the US. Responsibilities included I/O loop checkout, graphic modifications, point builder configuration, control builder logic changes, troubleshooting I/O hardware issues, assisting operations with instrumentation problems and resolving Ovation platform version 3.1 and 3.2 configuration issues. Completed startup and programming modifications on all Modbus communication links, this responsibility included modifying the program files, registers and scaling configuration changes

ABB AUTOMATION, FIELD SERVICE SYSTEM SPECIALIST 02/1991 - 07/2008 - DIRECT HIRE POSITION Responsibilities consisted of contract service and demand service for the southeast area of the U.S.A, internationally and Puerto Rico. I instructed hardware and software training courses for contract customers and demand service customers. I performed project commissioning, loop checkout, demand service calls that included power distribution and ground surveys on all distributed control systems. Install, test, configure and troubleshoot console software and smart module firmware. I performed system configuration on Bailey consoles and modules through an engineering workstation. Setup and troubleshoot fiber optic, twinax and coaxial infi-net and net90 loop communications. Startup, troubleshoot and configure Bailey engineering utilities i.e. CAD and Graphic Display Generator WLDG in DOS and Windows platforms. I completed startup and service tasks on the DEC Open VMS 6.X and QNX 4.0 operating systems. ABB Automation, Inc., Resident Service Engineer I completed a resident service engineering assignment for ABB automation, on site at the Union Camp paper mill located in Savannah, Ga. Responsible for a two-year project upgrade for six independent distributed control systems, which included Net90, Infi90 and Symphony products. I was responsible for the staging, installation, I/O checkout and maintenance for all six DCS systems. Installed, tested, repaired and upgraded the software, hardware and firmware on OIU, MCS and OIS consoles. Other tasks included were the configuration and service on all Bailey smart modules. Bailey Controls Co., Field Service Engineer III Responsibilities included the startup and service on Net90 and Infi90 Bailey Controls Distributed Controls Systems. Install and service the Infi90 fiber optic and coaxial communication loops. Performed power and ground surveys on both Net90 and Infi90 control systems. Completed software installations on all Net90 and Infi90 consoles and Engineering workstations. Setup and service on foreign device interface communication links. Upgraded base console software on all Bailey Controls consoles and smart modules. Modified logic configuration and loaded system software from the engineering workstation to the Infi90 consoles

Fischer & Porter Co., Technical Support Engineer 01/1984 - 01/1991 - DIRECT HIRE POSITION Responsibilities included domestic and international service support on all DCI control system products. I conducted formal training courses for field service and project engineers. Other responsibilities included writing technical bulletins and engineering notices for product development. Assisted customers and field service engineers with onsite issues, which included travel within the U.S.A. and internationally. Fischer & Porter Co., DCS System Service Engineer Responsibilities included HMI software and module configuration on all DCI-4000 and DCI-5000 products. Also worked on a project startup team and completed loop checkout on all DCI control systems. Installed and serviced DEC-NET and fiber optic networks. Installed hardware and software upgrades on Process Control Units and Consoles. Fischer & Porter Co., Startup Engineer Startup and service work on the V72 - V77 Sperry Univac controls system. Duties included the configuration of all system hardware and software. Completed project startup issues and I/O loop checkout on the DCI-4000 controls system. References Available upon request Email Phone - Cell Address Bradenton, Florida