Domingo — guide

ASI Inc. (assign @ Jacobs Engineering Group Inc. Houston TX 2017 - Present) CONTROL SYSTEM ENGINEER - TECHNICAL SPECIALIST ANALYTICAL SYSTEMS - Supports Invista ADN, and Canadian Kuwait Petrochemical Corporation I&C Front End Engineering Design projects - Technical resource for the control systems field specifically related to complex (major) Analytical Systems - Support P&ID, Instrument Index and I/O List development - Support development of material/labor TIC and engineering/design effort hour cost estimates - Develop analytical systems scope of work documents and support incorporation of analytical systems content into mechanical equipment vendor packages. - Develop DCS and SIS scope of work documents. - Develop and/or support development of analyzer data sheets, analyzer shelter/rack narrative specifications, analyzer system block diagrams, shelter/rack equipment layout drawings, sample conditioning system assembly drawings, sample supply/return layout drawings, probe assembly drawings, shelter/rack assembly drawings, transport time calculations, pressure drops, etc. - Provide technical direction for selection of items to be specified, ensure compliance with client requirements and standards, check specification/requisition packages prepared by others - Prepare engineering specification and requisition packages for inquiry and purchase - Prepare technical evaluations and make recommendations for purchase - Interface with suppliers to ensure compliance with specifications - Review vendor data to assure specifications and project requirements are met

I & C Installation and Commissioning Engineer (July 1975 - July1977) - Assign as Lead I&C Installation and Commissioning Engineer in Filsyn Plant Expansion (Phase I and Phase II) - Planned and supervised the work of instrumentation engineering and construction contractors. - Performed I & C commissioning which involves extensive inspection and verification of installed I & C systems equipment against P&ID's. Coordinate with I&C Design Engineer as required to resolve issues. - Verified materials, equipment, and workmanship, to ensure all installation meets all contract, design and code requirements. Performed inspections and documentation of all instrument work in progress on a continuing basis to ensure quality and conformance to project specifications, codes, and contract (customer) requirements are met. - Generated punch list to list all discrepancies such as missing instrumentation, control valves installed in wrong direction, reverse flow element impulse lines, incorrect ranges calibrated into local field instrumentation, etc. - Prepared I & C system ready for start-up by calibrating and simulating instruments, impulse line test, temperature elements polarity check, visual check of level gauges, stroke control valves, and functional loop check to verify the integrity of the wiring connections from the field transmitters to the main instrumentation and back to final control element. - Lead the design and installation of new equipment and the retrofit of existing equipment

FILIPINAS SYNTHETIC FIBER CORPORATION (Filsyn) - Manila Philippines - (October 1974 - July 1979)

Instrument & Electrical Assistant Maintenance Engineer (October 1974 - July1975) - Directed a strong safety awareness program with a consistent implementation of policies and procedures. - Worked closely with maintenance and operations to identify issues related to the electrical, instrument, and control system and take corrective actions. - Provided maintenance technical support to a manufacturing plant, when needed. This included troubleshooting, testing, evaluating results and safety. - Supported operations and maintenance on an as needed basis. Implement new techniques and technologies, such as equipment reliability, predictive maintenance, etc. to continuously improve. - Provided direction to contractors, maintenance and designers, as required. Ensure consistency in drawings and equipment on out-sourced engineering work - Developed and maintain the preventative maintenance program for electrical equipment, instruments, and control system. - Maintained accurate instrument and electrical history records of testing, calibration, repair and inspection/checkout. - Participated in the management of change (MOC), Route Cause Analysis (RCA) process and HAZOP review for upgrade or modification. - Reviewed the modification/upgrade projects for technical compliance with the facility. Ensured all the relevant documents such as P&ID's, Instrument Index, Instrument Loop Diagrams, controls system drawings and narratives, instrument data sheets, electrical equipment list, electrical single line diagram and etc. are revised and updated. - Reviewed electrical and instrumentation maintenance procedures and practices of performing periodic inspection of electrical equipment & instruments. - Revised procedures to improve effectiveness of E&I maintenance and inspection process. - Reviewed all electrical and instrumentation equipment PM and inspection reports - Reviewed project books at the completion of new electrical and instrument installation and provide recommendation on new inspection process. - Participated in weekly departmental planning and scheduling meeting. - With respect to E&I, developed, implemented, and oversee annual Planned Maintenance Turnaround (PMT) program identifying equipment being PM and overhauled; scheduling meetings between all departments prior, during, and after, along with contractors; and delegating responsibility of person in charge of particular equipment outage. - Coordinated work with the I/E Maintenance Planner in the planning of corrective maintenance activities

Wink Engineering LLC. - Rose Louisiana 70087 USA, (Previous Willbros) Sr. Instrumentation & Controls Engineer - (Sept. 30, 2013 to August 30, 2015) - Representative Assignments as Lead I&C Engineer includes upgrades/revamps as well as grassroots projects and utilities of the following facilities: a. Chevron Oronite - Belle Chase Louisiana b. Marathon Refinery - Garyville Louisiana c. d. Valero Refinery - St. Charles Louisiana, Norco Louisiana, Meraux Louisiana, Port Arthur Texas, Mckee Texas, Sun Ray Texas Motiva Enterprises LLC - Norco Louisiana, Convent Louisiana e. Philipps 66 Alliance Refinery- Belle Chase Louisiana f. IMTT (International-Matex Tank Terminals) - St. Rose Louisiana g. Exxon Mobil - Chalmette Louisiana h. Lion Oil Refinery - El Dorado Arkansas i. Sinclair Oil - Sinclair Wyoming j. Eagle Ford Pipeline k. Castleton Commodities Inc. Condensate Splitter in Corpus Christi TX - - Provided field construction support on the above mentioned facilities. - Provided functional administration to Engineers and Designers. Assigns work, provides coaching and quality control. - Provided consultative knowledge on automation and instrumentation technology for chemical plants, gas and oil refineries and heavy industrial clients. - Served as the project discipline Focal Point to the Client and other internal discipline functions (Process / Mechanical, Piping, Civil / Structural / Architectural, HVAC, etc.) - Analyzed Client needs and provide control systems solutions that meet the Client's objectives for safety, quality, cost and schedule. - Developed the scope of work intermediate to complex control systems solutions, provide cost estimates, and project execution plan to implement the scope of work from front end engineering through start-up. - Provided a resource loaded schedule to track progress, changes, earned value and forecast to complete. - Prepared instrument files/index. Prepares and writes instrument requisitions for projects. - Developed specifications and implementation plan for major control systems equipment such as Distributed Control Systems (Delta V and Honeywell Experion), Programmable Logic Controllers (PLCs), Safety Instrumented Systems (SISs), Process Analyzer Systems, Toxic Gas and Combustible Gas Systems and Control Panels. - Developed a specification and implementation plan for process control applications that include state based control, regulatory control, sequential control, batch process control, alarm systems and alarm management. - Developed specifications and implementation plan for integration of the process control system with Asset Management Systems and Enterprise Control System. - Sized, developed specifications, provides bid analysis, and selects process industry fundamental measurements such as flow, pressure, differential pressure, vacuum, level, and temperature. - Provided bid analysis to support selection of control valves, automated block valves, pressure regulators and temperature regulators. - Provided input to process-mechanical packaged equipment which relates to instrumentation and control systems. - Provided discipline input into Site Facilities such as Utilities, Control Buildings, Control Centers, Remote Instrument Enclosures, Marshaling-I/O Rooms, Analyzer Buildings and Motor Control Centers. - Produced "Issue for Construction" quality deliverables from P&IDs, General Arrangement drawings, purchase specifications, vendor data, OIM manuals, and project standards which include; Plans and Details, Connection Wiring Diagrams, Panel Layouts, I/O Schematics, DCS/PLC Network Drawings, Conduit and Cable Schedules, Loop Diagrams, Panel Schedules, Fabrication Drawings. - Reviewed drawings and vendor equipment documentation of moderate to advanced complexity from both within the discipline as well as from other disciplines for compliance with project requirements and integration into the balance of the Plant. - Provided input for project cost and schedule improvement based on design knowledge and experience. - Checked, created or revised instrument loop, field junction box, marshalling and process instrument drawings. Provided orifice calculations/specifications, valve sizing/specifications, & miscellaneous instrument specifications. - Participated in P&ID's development. Checks P&ID's for correct instrumentation and conformance to client standards for changes management and project work. Attends project review meeting for reviewing P&ID's. - Worked with others multi discipline engineers to accomplish challenging assignments. - Multi-tasked and prioritized multiple assignments to ensure completion of tasks within stated time requirements

Sr. Instrument Engineer (Sept. 1997 - March 1999) - Assigned as Field Commissioning and Start-UP Instrumentation and Controls Engineer in the Geothermal Plants (Malitbog, Tongonan & Upper Mahiao) H2S Abatements in Leyte Philippines. - Design Phase Engineering Experience o Prepared instrumentation and controls Engineering, Procurement, & Construction (EPC) of H2S Removal and Sulfur Recovery Plant. o Performed conceptual front-end engineering design (FEED)., such as developing control narrative & P&ID, preparing detailed instrument specification, engineering scope of work, man-hour/cost estimates, performing instrument selection, and valve and flow meter sizing, programming PLC, configuring HMI. o Designed controls, and emergency and shutdown systems, and logic diagrams. o Performed PLC and HMI programming to control and monitor H2S Abatement. o Performed Factory Acceptance Test (FAT) with the presence of Client Representative. - Construction Phase Engineering Experience o Managed construction activities of instrument & control components & equipment to ensure compliance with engineering drawings, specifications, environmental guidelines, quality assurance programs and construction safety program. o Conducted daily construction walk-downs throughout the day and attended safety and construction site walkthrough o Provided daily/weekly/monthly construction progress/status report / o Checked and verified compliance of instrumentation-related construction drawings. o Prepared Instrumentation requisitions and procurement. o Monitored and reported receipt of materials on site o Supervised I & C installation which involves extensive inspection and verification of installed DCS, SCADA, RTU, Instrumentation, and Analyzers against P&ID's. o Coordinated with I & C Design Engineer as required to resolve issues and work closely with other project discipline members o Verified materials, equipment, and workmanship, to ensure all installation meets all contract, design and code requirements. o Performed inspections and documentation of all instrument work in progress on a continuing basis to ensure quality and conformance to project specifications, codes, and contract (customer) requirements are met. o Performed Site Acceptance Test (SAT) with the presence of Client Representative. Ensured hardware and software platforms are operating without fault at high reliability levels. o Generated punch list to list all discrepancies such as missing instrumentation, control valves installed in wrong direction, reverse flow element impulse lines, incorrect ranges calibrated into local field instrumentation, etc. o Performed commissioning of I & C system for start-up by calibrating and simulating instruments, impulse line test, temperature elements polarity check, visual check of level gauges, stroke control valves, functional loop check to verify the integrity of the wiring connections from the field transmitters to the main instrumentation and back to final control element, and interlocks/alarm checks

Instrumentation and Controls Designer - (Sept 1990 - Sept 1997) - Designed I & C system package which includes system control descriptions, engineering specifications, P&ID's, control circuit schematic diagrams, instrument loop diagrams (ILD's), logic diagrams, instrument index, and cable schedules

Instrumentation, Electrical & Controls (IEC) Planner 1986-1990 - Planned, scheduled and directed Instrumentation and Controls plant maintenance routine (PMR), repair works and troubleshooting, and turnaround routine (TAR). Supported IEC supervisors to carry out IEC maintenance schedule. Estimated job scope, number of men by craft, total man-hours required for each job, and established material requirement. Prepared maintenance schedule through computerized maintenance management system (CMMS) which encompasses all elements of maintenance functions such as work order system, planning and scheduling, material storehouse, material requisition, work execution and time recording, equipment records and history, and maintenance cost reporting. - Developed work execution plans for IEC maintenance jobs across the Refinery. - Coordinated with other Area Maintenance Planners on manpower needs to execute planned IEC jobs. - Support operations and maintenance on an as needed basis. Implement new techniques and technologies, such as equipment reliability, predictive maintenance, etc. to continuously improve department operations - Evaluated planned costs versus actual costs and looking for ways to improve equipment-specific work plans from accurate and efficient work execution strategies that promote safety and environmental excellence. - Occasionally back-filled for IEC maintenance supervisors. - Constructively resolved priority, scope, and job step and resource requirements in collaboration with operations. - Critiqued and adjusted plans and task lists for completed jobs based on information from craftsmen and supervisors. - Complied with all policies and procedures per Plant regulations and International Standard Code. - Observed safe work practices including wearing personal protective equipment. - Incorporated maintenance, safety and environmental procedures into all work plans. - Provided daily support to assigned I&C team, insuring hardware and software platforms are operating without fault at high reliability levels. - Supported operations during troubleshooting, upset or emergencies, improving instruments and controls in the area. - Supported projects, prepares and executes Instrumentation work. - Supported commissioning and start up in adding gas processing capacity to the existing gas complex and Claus Sulfur Recovery with sulfur degassing unit. Added slug catcher, feed gas heat exchanger to increase the capacity existing Dyglycol Amine (DGA) and Triethylene Glycol (TEG) with fuel gas stripping to dry the sweet gas. Also revamp the compressor, added cooling tower and electrical substation. instrumentation engineering groups in Instrumentation and Analyzers installation

Lead Analyzer Technician 1982-1986 - Performed plant maintenance of LEL and H2S monitors, analytical instruments (such as density meter, pH meter, conductivity meter, turbidity meter, spectrometry), O2 analyzer, laboratory and on stream computerized gas chromatographs analyzers (such as Flame Ionization Detector, Flame Photometry, thermal conductivity detector, spectrometry), Tail Gas H2S/SO2 Air Demand Analyzer (Claus Process), CO2 Analyzer, Continuous Emission Monitoring System(CEMS), etc. - Lead in all aspects of safety, auditing hardware, coaching personnel and leading by example. - Assisted analyzer technicians in troubleshooting analyzers and analyzer sample systems. - Assisted in the training, development and qualification requirements for analyzer crafts. - Assisted in the development, implementation and maintenance of analyzer engineering standards. - Assisted in the identification of bad actors and the development of analyzer routine maintenance and preventive maintenance (PM) procedures. - Assisted in the development and execution of the analyzer long range plan. - Worked as a team with the analyzer maintenance group and Electrical, Instrument & Control System Staff to support operating areas and projects. - Participated in root cause analysis of equipment failures and incident investigations. - Assisted in development and maintenance of documentation. - Assisted in development and implementation of a QA/QC program for analyzers. - Supported Commissioning Group in Commissioning and Start-Up of on-line gas chromatographs analyzers

Lead Instrument Technician 1979-1982 - Performed plant maintenance and troubleshooting of process instrumentation (such as flow, level, pressure, and temperature), single and multi-loop controllers, recorders, vibration monitors, multipoint temperature indicators, emergency shutdown (ESD), boiler controls system and DCS (Honeywell TDC 3000) - Performed digital, instrumentation, and analyzers commissioning and participated in plant start-up which includes compressors, turbines, boilers, etc. - Supported calibrating and simulating instruments, impulse line test, and temperature elements polarity check, visual check of level gauges, stroke control valves, and functional loop check to verify the integrity of the wiring connections from the field transmitters to the main instrumentation and back to final control element. Commissioning Group and lead instrument technicians during commissioning in

Electrical and Instrumentation Supervisor 1977-1979 - Supervised 26 technical staffs composed of unionized electricians and instrument technicians. - Developed and implemented working permit procedure to ensure compliance with safety practices. - Managed and provided technical direction for Electrical and Instrumentation routine maintenance, preventive maintenance, trouble shooting, tuning, and calibration program for instrumentation and control system to ensure that the process control systems function properly. - Performed visual periodic inspections of the control panels, and motor control centers to determine the status of the instruments, and electrical devices. - Provided reports to management regarding problems associated with plant and system controls. - Conducted investigation to determine the causes of trips and similar events and developed measures to avoid recurrence. - Trained technicians to ensure they reached the desired skill level and keep them abreast of the new technology

Major strengths include the followings: - Strong work ethic coupled with project management and creative thinking skills has enabled successful career development. - Versatile and capable of handling multiple projects, producing quality and adhering to schedules, meeting and beating deadlines. - Strong leadership, excellent communication skills, and competent. - Strong team player who trains and guide others. - Dutiful respect for compliance in all regulated environment. - Also a very dedicated, self-motivated, responsible, organized and reliable individual well rounded that enjoys accepting a challenge and positive attitude. - Thorough knowledge of current practices and a clear vision to accomplish the company goals. - Computer and Internet literate. Self-starter with proven leadership abilities, strong interpersonal skills and problem-solving abilities. - Team player with ability to influence and manage a team to get positive results. - Strong communication skills, both written and oral. - Able to present issues, concerns and provide recommendations and solutions to management

Cameron LNG - Hackberry Louisiana / Houston TX 77042 USA, Sr. Instrument Engineer (August 31 2015 to Feb 3 2017) - Responsible for technical direction, expertise, and leadership of all facility instrument and control hardware system activities associated with the Cameron LNG project, in line with the company's objectives of safety, reliability, maintainability. - Monitor the facility's instrument and control hardware work which consists of a DCS system and Node Bus ICS systems. - Follow the project to the field to assist with construction, commissioning, and start-up activities later in the project schedule. - Audit EPC detailed EPC designs for Instrument and controls including Analyzers hardware engineering. - Oversee EPC Contractor's Instrument and control hardware design activities. - Ensure that the Instrument engineering design and implementation is safe, performs to the requirements of the design and meets the Project Specifications. - Attend Kick-off, Detailed Design, Model Reviews, and Pre-Inspection Meetings. - Participate in Process HAZOP analysis as needed. - Interface with EPC counterparts and other EPC and Client disciplines on a project task force. - Pro-actively track the project deliverables. - Attend and participate in regular Contractor construction meetings. - Tracking construction schedule and progress and ensuring overall project schedule compliance. - Monitor and report on construction and commissioning test activities as per design and planning. - Reviewed vendor's I&C and Analyzers drawings to ensure compliance to project requirements. - Participated and coordinated the Factory Acceptance Test and Inspections of Thermal Oxidizer, Gas Compressors, Air Compressors, Blowers, Air Dyers, Reverse Osmosis, Water Softener, Standby Diesel Generator, Heaters, Flares, Analyzers, etc. - Participated in the management of change (MOC)

Jacobs Engineering Group Inc. - Louisville KY 40220 USA, Sr. Controls Engineer - (July 16, 2013 to Sept. 30, 2013) - Representative Assignments as Lead Control Engineer include: a. Clariant Catalyst Plant in Louisville KY b. Dupont Chemical Plants in Tennessee, Ohio, and West Virginia c. Bayer Larvin Facility Crop Science d. Union Carbide - Provided field construction support on the above mentioned facilities. - Provided consultative knowledge on automation and instrumentation technology for chemical plants, gas and oil refineries and heavy industrial clients. - Served as a discipline lead representing control systems department in all phases of large and small capital projects from project identification through detail design. - Developed project scope, provided input to project cost estimates and schedules. - Developed issue for construction packages, provided construction and operations support. - Directed and coordinated operation, maintenance, and repair of equipment and systems in field Installations - Provided coaching and support to less experienced designers and engineers. - Participated in planning, cost development and management, and scheduling for assigned projects. - Directed activities to ensure that construction, installation, and operational testing conform to functional specifications, recognized codes and standards, and customer require. - Performed design tasks according to Jacobs design and quality standards and procedures. - Coordinated with other design disciplines. Coordinated with designers and drafters as part of design team. - Evaluated the desired goal of the system and developed, designed, or selected the required equipment, power controls, piping, structures and earthwork to achieve the goal: Performed calculations and evaluations in the design of equipment and systems for industrial and commercial applications: - Maintained effective communication with project team members and with the customer - Developed conceptual studies and layouts, cost and planning studies, construction specifications and design calculations to produce documentation necessary to completely convey design, purchase and install all items within the Control Systems scope of a given project. - Ensured that every effort was made to conform to Client (or Jacobs) specifications, governing design codes, and good engineering practice. - Consulted with design personnel in resolving routine layout and detailing problems. Produced accurate engineering design, considering efficient use of materials and ease of field construction. - Checked, created or revised instrument loop, field junction box, marshalling and process instrument drawings. - Provided orifice calculations/specifications, valve sizing/specifications, & miscellaneous instrument specifications. - Participated in P&ID's development. Checks P&ID's for correct instrumentation and conformance to client standards for changes management and project work. Attends project review meeting for reviewing P&ID's

CB&I / Shaw Project Services LLC-Savannah Dr. Aiken SC 29804, USA, Sr. Instrumentation & Controls Engineer - (April 16, 2012 to July 15, 2013) - Assigned as Field Construction Support Instrumentation and Controls Engineer in the construction of MOX (Mixed Oxide) Fuel Fabrication Facility in Savannah River Site, Aiken, South Carolina. - Responsible for the instrument and controls design for a number of assigned process or utility systems for MOX - Executed the required duties and activities with little technical direction from I & C Lead Engineer. - Responsibilities also included cross discipline review of design documents and interface with client, vendor, and other disciplines; reviewed work of fellow engineers; performed vendor submittal review and bid analysis; and coordinated design with other disciplines. - Worked closely with the appropriate Responsible System Engineer, the assigned Integrated Safety Analysis personnel, the electrical design staff, and the other discipline engineers assigned to the same systems to complete the final I&C design documents with both the limits of the budget and schedule baseline. - Influenced I&C group and provided knowledge and leadership to assist less experienced personnel and the design staff. Developed drawings of complex instrumentation and control schemes. - Responsibilities included development of the detailed design on to the project drawings. Design included P&ID development, instrument loop diagram, instrument installation details, instrument plan and layout drawings, PLC wiring diagrams, bill of materials, Instrument Data Sheet, Instrument List, Instrument I/O Lists, Logic Diagrams, and Instrument and Controls procurement specifications. - Provided orifice calculations/specifications, valve sizing/specifications, and miscellaneous instrument specifications. PARSONS - Pasadena CA, U.S.A., 830 Eastern Bypass, Suite 106 Richmond, Kentucky 40475, Tel 859

624-7220 Sr. Instrumentation & Controls Engineer - (Dec. 12, 2010 to April 16, 2012) - Assigned as Field Construction Support Instrumentation and Controls Engineer in the construction of BGCAPP (Chemical Agent Destruction Pilot Plant) Richmond, KY - Provided I & C Design that will use advanced technology to neutralize a significant portion of US government's chemical agent stockpile. - Performed complex design assignment that applied engineering techniques similar to those found in chemical process and utility plants. - Participated in P&ID's development. Checks P&ID's for correct instrumentation and conformance to client standards for changes management and project work. Attends project review meeting for reviewing P&ID's. - Reviewed and prepared I & C drawings, design calculations and provided design recommendations. The recommendations adhere to applicable codes, standards, and procedures. - Provided input and technical guidance to I & C Designers as well as other engineers and vendors working on the same deliverables to promote technical excellence. - Prepared logic diagrams. - Prepared I&C datasheets, instrumentation summaries, I/O summaries, alarm summaries and wiring schedules. - Checked, created or revised instrument loop, field junction box, marshalling and process instrument drawings. - Reviewed vendor drawings to ensure compliance to project requirements. - Performed design verification of Instrumentation designs. - Performed Instrumentation design calculations and provided Instrumentation specifications for the purchase of new equipment. - Provided orifice calculations/specifications, valve sizing/specifications, & miscellaneous instrument specifications. - Performed analyzer design and provided analyzer specification for the purchase of new complete Analyzer System such as THC, CO, CO2, Air Monitoring, O2, pH, conductivity etc. - Provided engineering design and specifications to support procurement and construction activities for projects. - Developed detailed scope of work details for Instrumentation design packages. Participated in HAZOP study and analysis. Participated and coordinated the Factory Acceptance Test of Robots, Conveyor, Thermal Oxidizer, Steam Boilers, Chillers, Compressors, Blowers, Reverse Osmosis, Water Softener, Standby Diesel Generator, etc. - Prepared Instrument and Analyzer material requisition for quote and purchase. - Performed complex engineering tasks efficiently and accurately related to instrumentation. - Reviewed/commented on instrument engineering control systems like instrument location layout drawings, cable block diagram and cable schedule, control room layout drawings, control schematic diagram-control and logic diagram for control system equipment. - Prepared and issued specifications, data sheets, and other construction documents. - Reviewed contract drawings, specifications and other procurement materials that have been prepared by others; and provided comments on the results of the reviews. BAXTER & WOODMAN INC. CONSULTING ENGINEERS - 8678 Ridgefield Rd Crystal Lake, Illinois 60012, USA, Sr. Instrumentation & Controls Engineer - (April 1999 - November 2008), (February 2009 - October 2009) - Design Phase Engineering Experience o Developed and provided front-end engineering design (FEED) of Instrumentation & Controls (I&C) which includes preparation engineering specification, system control narratives, instrumentation calculation, P&ID's, process control & motor control circuit schematic diagrams, instrument loop diagrams (ILD's), logic diagrams, instrument index, and cable schedules.. o Planned and designed Supervisory Control and Data Acquisition (SCADA) Systems and Remote Terminal Units (RTU), Distributed Control Systems (DCS), and Security System (CCTV, Access Control, and Intrusion). o Designed Radio and Wireless Network SCADA System. o Designed Fiber Optic Network SCADA System. o Performed hardware and software integration, project cost estimations, programming, and hardware selections which includes computers, programmable logic controllers (PLC), Human Machine Interface (HMI), Variable frequency drives (VFD), radio transceivers, fiber optics, and field bus Instrumentation, and Analyzers. o Participated in and provides input to the bidding process. - Construction Phase Engineering Experience o o Acted as a Client I&C Engineer to monitor the construction of the Water and Wastewater Treatment Plants. o Collaborated and maintained positive relationship with the EPC Contractor. o Attended B&W internal and EPC Contractor coordination meeting(s) including safety briefing. o Attended safety and construction site walk through. o Monitored construction activities of instrument & control components & equipment to ensure compliance with engineering drawings, specifications, environmental guidelines, quality assurance programs and construction safety program. o Prepared daily/weekly/monthly construction progress/status report. o Scheduled and led meetings as necessary to keep track of progress on construction projects. o Coordinated activities and resolved issues among proponents, contractors and other parties to allow construction activities to progress according to plan and the final completion. o Reviewed contractor technical submittals, quality control program, commissioning & start-up plans and schedules. o Reviewed contractor drawing, calculation, PLC programming and HMI programming submittals. o Reviewed and analyzed Radio Path Study using Frequency Hoping Spread Spectrum and UHF technologies. o Ensured that construction and installation follow the design specification, testing and commissioning procedures. o Ensured that instrument and associated devices are designed and installed according to code and plant practices. o Ensured proper calibration of instruments, control equipment and device, control valves o Attended and witnessed Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) o Participated in final inspection and prepare "punch lists" and preparation of technical responses. o Verified readiness of I & C system equipment for start-up such as punch list items were corrected, calibration & loop checking were completed. Ensured the test procedures are in accordance with manufacturers' manuals. Witnessed commissioning and start-up. o Troubleshoot and resolved problems incurred during installation and start-up of process control systems

MANGAN INC. - Long Beach, California 90810, USA, Instrumentation Design Specialist - (Dec 2008 - January 2009) - Assigned as Field Construction Support Instrument Engineer in the small capital projects in BP Refinery in Carson California. - Coordinated with Project Manager and Project Engineers in executing instrumentation, controls, and automation projects. - Performed field walk-downs at client sites, attendance at client meetings, participation in project scoping and estimating, the development and review/approval of Instrumentation and Control packages for heavy industrial, oil refining, petro-chemical, pipeline or similar facilities, attending project team meetings and status meetings, participation in FAT / SAT, project loop checks and startups. - Developed P&ID's, simple and complex I&C loop diagrams, instrument indexes, wiring/connection diagrams, set points schedules and I/O schedules. - Specified and prepared control system, foundation field bus SIL instruments and developed construction scope for client specifications. - Designed SCADA, DCS and PLC control system, including control room layouts, networking systems, I/O Marshalling and Terminal Cabinets, power supplies, interposing relays, transducers and other instrument and control hardware and installations. Detailed electronic and pneumatic instrument installations and developed conduit routing. - Prepared engineering specification sheets for field measurement Instrumentation for level, temperature, pressure and flow applications, analyzers and analyzer systems, control valves, ESD valves, MOVs and relief valves. - Performed calculations for flow meters, control valves, relief valves and thermowells. US FILTERS/GAS TECHNOLOGY - a100 Schaumburg, Illinois 60173, USA, Tel

SAUDI ARABIAN AMERICAN OIL COMPANY (SAUDI ARAMCO), SHEDGUM GAS (LNG) PLANT - Saudi Arabia - (July 1979 - May 1990)