Smruti — Automation Engineer

The detailed control logic was implemented in Arduino and Remodeled the whole system.•Designed the system using Arduino and developed all the hardware using Free-CAD.

Electrical Engineering graduate student looking for a co-op or full-time in control system sector starting May 2018

Siemens S7 PLC (Old Turbines) & Allen Bradley SLC-500 ControlLogix PLC (New Turbines) [All the codes were written in Ladder Logic].

Exposure in planning & execution of maintenance for plant, retrofitting & Design of Machine Control Systems using Siemens S7 PLC (Old Turbines) & Allen Bradley SLC-500 ControlLogix PLC (New Turbines)

C++ & Python Programming

Root cause analysis of repeated faults, resolving customer queries and improving customer satisfaction.

“Industrial Automation by Programmable Logic Controller” Training in Central Tool Room and Training Center- Dec 2011

In a milling machine, when we press push button (PB1), the motor will start. When we released the pushbutton, the motor will stop. If another pushbutton (PB2) is pressed the motor should starts and when we release the pushbutton the motor will continuously run. In case a fault occurs, emergency stop pushbutton PB3 is pressed to stop the motor. If the emergency push button pressed PB1 & PB2 will not work.

In a packaging conveyer when a start switch is made ON after counting a packets of 5,an output gate(G1) gets opened and remains in open condition. When it counts 10 another output gate (G2) gets on. After G2 gets on both the gates should remain on for 5 second. After 5 second the counting and the opening of gate should repeat automatically.

Three pumps are to be monitored. If all 3 pumps are running, one digital output should glow steadily, if any two pumps are running the output should flash slowly and if only one pump is running then the output flashes at a faster rate. (Using Only one digital output).

Implemented Adaptive cruise control, Adaptive light control, Automatic braking, Automatic parking, Blind spot detection, Collision avoidance systems, Intelligent speed adaptation, Lane departure warning systems and Night vision using CAN controllers in Ford Escape.