Greig — Controls Engineer

Have done quite a bit of controls design. Mostly in the 24V side. I have done high power side but not as much.

Full ground up build, commission, debug and buyoff of many different types of machines for the last 8 years. PLC, HMI, ABB, FANUC, MOTOMAN. Robot interfaces to PLC as well as teaching robot paths and commissioning robot cabinet and on board IO signal mapping.

Full design, build, comissuon and debug with FactoryTalk View and Maple HMI's.

This is my strongest asset.

Managed teams of mechanical and controls personnel at customer sites during install. Main point of contact to the customer on many occasions during buy off.

ALLEN BRADLEY - ALL LOGIX PLATFORMS. SIEMENS - TIA PORTAL

More PLC experience but I can definitely pick up a pendant when necessary. ABB, FANUC & MOTOMAN.

I have designed and then wired my own panels and field boxes. Full design of controls prints (24V) with AutoCAD. Some high power design as well but I'm not a ticketed electrician so I stay away from wiring high power circuits.

Controls Integrator (Contract) Valiant TMS - Windsor, ON September 2023 to Present Integration of the new challenger lines (PLC & Electrical)

Controls Integration (Contracted) - Windsor, ON Full integration, commission and debug of automated control systems. Ultrasonic welding and inspection.

Lead Controls Programmer - Oldcastle, ON 1 year contract Responsibilities include: • Full PLC program structure design and logic implementation and debug for various types of automated machinery using RS Logix Studio 5000 v30-34 • Full HMI design and programming including security using Factory Talk v10-13 • Electrical print and panel debug • Electrical design of IO layout using Auto CAD • IO setup, check and debug for all machine sensors • Robot program touch up and debug of logic (fanuc,abb,motoman) • Travel to customer facility and provide full on site controls support until buyoff is achieved • Design and implement CAM profiles for servo routing of various shapes (Microsoft Excel)

Controls and Robotics Technician - Windsor, ON • PLC controls with RS Logix Studio 5000 • HMI development with Factory Talk Machine Edition • HMI development with SOLIDWORKS • ABB IRC-5 robot programming • Motoman YRC-1000 robot programming • Multi-device networks ( vision cameras, bar code scanners, etc.) • Electrical field wiring • Troubleshooting/full debug of automated machines • Electrical panel build/debug

Robotic Paint Line Technician - Tecumseh Plant - Windsor, ON - Maintain robotic paint line - ABB C5, S4 & IRC5 robots - Ensure robots are painting the correct amount by keeping detailed Excel sheets - Maintain communication with paint kitchen for colour changes - Mechanical and pneumatic repairs - Monitor HMI and PLC - Quality inspection of parts - Changes to robot programs with ABB's Robot Studio - Direct edits of IPS brush files

Quality Inspector - Windsor, ON - Quality inspection for automotive parts. - Check for defects, scratches, threading etc. - Requires close attention to detail and excellent time management - Preparing data sheets and using a scanning system to log in completed work - Fast paced, repetitive tasks

General Labourer - Windsor, ON Responsibilities - All different types of General Labour at various locations, including; - Automotive Assembly - Machine Operation - Inspection - Fast paced, repetitive tasks Skills Used - Physically able - On time and dependable - Ability to work multiple shifts or overtime

(WINDSOR) - Windsor, ON - Used AutoCAD Inventor and Microsoft Power Point software to create reports for build team. - The reports included machine sequencing, valve & switch layouts and material lists. - Material lists put together using Microsoft Excel and were sent to purchasing. - Worked as part of a team. - Contributed to staff meetings. - Expanded my communication and networking skills. - Learned a lot about machine sequence and the importance of paying close attention to detail. - Worked with the electrical build team on the floor putting together the machines which I had previously made reports about. - Ran cable tray both on the floor and above using air drill and ratchet - Gained a good understanding of electrical blueprints - Tool cording fixtures - Making back plates and mounting I/O blocks using a variety of different tools ( band saws, grinding wheel, drill and tap etc.) - Wiring of safety boxes and small panels in the panel shop. - Gained valuable knowledge in both the controls design aspect and build aspect of manufacturing robotic welding cells.

(SUMMER STUDENT) - Windsor, ON - Worked both independently and as part of a team. - Shadowing full time technicians. - Learned many tricks for troubleshooting robot faults and machine stoppages. - Replaced sensors that had gone bad. - Re-ran tool cord if it stopped working. - Used a variety of different hand tools ( wrench, screwdriver, vice grips etc.) - Cleared faults using the robot pendant - Received training with Fanuc, Kuka, Motoman, and Kawasaki robots. - Connected to PLC with RS-LINX and monitored the live programs, occasionally live editing. - Received training with Allen Bradley PLC 5, 500 and 5000