Diogo — Maintenance Analyst

I have worked almost 11 years with large experience with ABB robots, System installation and debugging, configuration, I know all the differences between RW versions, EPS configuration and some knowledge in SAFEMOVE. Also I have worked directly in electronic repair of every boards of all ABB Controllers such as drive system 04 and 09, DSQC346, DSQC236 and similar. Pendant units repair and much more. System installation in Compact flash and SD Cards. Experience from RW 5.07 to current RW 6.XX. Installation of operation systems in site and debugging. In some cases modifying positions although I don't have such strong skills in programming. Strong skills using robotstudio to configure, debugging parameters, program modules and so on, but not to program although I know all instructions.

Strong skills in Eletronic repair, system installation, configuration and debugging. But although I have worked many years with KUKA robots never had the chance to join a project.

Experience with configuration, IO setting, Program position correction, eletronic boards repair.

Experience with eletronic boards repair, system configuration and installation, backup and restore, controlled and INIT start configuration, IO declaration, and Program Touch-up.

I have worked and has a training about programming and maintenance at Omron Robots, Mobile Robots, LD Series, sCobra, eCobra, eAIB, AIB, CX and EX CPUs, low experience with TM Robots as well.

I have skills in maintenance, eletronic boards repair and programming pendant unit repair. Some skills in configuration but low experience programming although I know some of the instructions.

I have learned about TIA Portal still in College and Technical School. No problem with Ladder Programming. I continued learning and studying alone at home through TIA Portal. Importing profibus files, and inserting IO Cards and Communication Cards in TIA Portal in order to keep in touch with the software. I have never joined a project, but I would be willing to try.

I have learned some programming in College and technical school, but I have not worked direclty with it.