Antonio — Robot Programmer

Tesla Gigafactory Austin, TX OLP program adjustments are made in KUKA robots and work is done in the vacuum cycle of 6 lines with 3 robots each, also in the finished product and product welding quality tests

Normal, Illinois. FANUC robots are configured and programmed on the SKI BOARD Rivet projection SPOT welding lines at RIVIAN. Auburn Hill, USA FANUC robots are configured and programmed in different MIG (12 robots), MH, spot processes (10 robots), and IR Vision (4 robots) for the CANO lines. For IR vision the robots were calibrated, mastered, and tested for the full chassis at Valiant TM. This project takes about 4 months from September to December 2021. Lathrop California, USA. FANUC robots are configured, 10 programs are made from scratch since the OLPs do not work in the first line of a FANUC robot and 4 stations with 60 SPOT welding points, LINCON machines are configured for the 6-station process with 3 FANUC robots for the MIG welding process change MIG welding parameters to give quality in the product obtaining very good results vision cameras are programmed to validate that the part does not have a gap in TESLA LATHROP. Kentucky USA FANUC robots are configured and programmed in different MIG, MH, and spot processes In FORD EXPEDITION lines.

México City, Mx. Support of the already installed lines of the Ford E Mach truck and begins to change programs for the installation of the expansion of the said line and in the configuration, programming of the new Ford lines México City, Mx. Spot welding parameters are configured and programmed in the different Ford production lines for the E Mach truck Achieving a 94% splash target.

San Luis Potosi, Mx. Staff management in robot programming Creation of instruction sheets for predictive, preventive, and corrective maintenance Programming and configuration of Fanuc and Kuka robots Responsible for the proper functioning of 160 Kuka robots and 70 Fanuc robots. laser welding Nordson and Intec brand seal application Cycle time improvements Realization of programs Bug fixes in robotic lines Configuration and programming of welding lines (MIG, SPOT, MATERIAL HANDLING, RIVET)

Programming and configuration of Fanuc robots for the following companies: Magna FORMEX (SALTILLO COAHUILA) programming of 110 FANUC robots' application MIG welding. Magna POWER TRAIN (SALTILLO COAHUILA programming of 5 FANUC material handling robots. Magna ESTAMPADOS (SALTILLO COAHUILA) programming of 25 robots in different processes in MIG, SPOT, and LASER welding. Magna San LUIS METAL FORMIN (SLP) programming of 120 FANUC robots in MIG welding, 20 FANUC robots in material handling, and 1 KUKA robot in LASER welding. Magna SALZGITER (GERMANY) programming of 50 FANUC robots in the Spot-welding process 10 material handling robots and 4 FANUC MIG welding robots. Magna P&F (DETROIT USA) programming of 10 robots SPOT welding FANUC Magna FORMET (CANADA) programming of 25 FANUC robots in the MIG welding process 2 FANUC robots in the welding process material handling and 4 FANUC robots in the Rivet process. Magna SONORA METAL FORMIN (SONORA) programming of 4 FANUC robots for the Rivet process 2 FANUC robots for the MIG welding process and 3 FANUC robots for the Spot-welding process. Magna THAILAND programming of 2 MOTOMAN robots (Yaskawa) MIG welding process Magna FORMEX (SALTILLO COAHUILA) programming of 50 MOTOMAN (Yukawa) robots for MIG welding application and 4 MOTOMAN (Yaskawa) robots in the material handling process Configuration and programming of welding lines (MIG, SPOT, MATERIAL HANDLING, RIVET)

Participate in the maintenance team programming and adjusting MIG welding cords on the A-4 VWM twist axle lines Chrysler CJ49 and also in corrective preventive maintenance on Fanuc robots.

Puebla, Mx. Participation in the automation area maintenance team programming numerical control lathes and servo motors. Carried on Fanuc preventive and corrective maintenance.

Puebla, Mx. Participation in the organization and change of production lines for the continuous improvement and development of the Motoman (Yaskawa) ABB and FANUC robot cell in the different MIG SPOT and LASER welding processes.

I participated in programming adjustments in the different production lines, having preventive and corrective maintenance tasks, and improving cycle times in the same MIG welding lines in the manual application and FANUC robots.