Oscar — Controls Engineer

Controls Programmer for Cosma/Massiv (Brampton,Ontario) Project KAMTEK-Mercedes "BR167" (Front & Rear Doors LH/RH) Project CBAM-GM "C1YX FR" (Front Rails LH/RH) •Elaborated the logic for these projects using the Cosma template. •Developed the Safety logic for E-stops, Pull Cords, Light Curtains, and Conveyor/Roller Doors Motors using electrical drawings. •Validated system safeties function as designed. •Established communication with all line equipment/devices in a Ethernet Network. •Implemented Part Tracking, and tooling changers logic. •Designed the logic to skip conveyor pallets and rotate trunnions. •Modified DCS signatures. •Performed the Dry-Cycle, Robot Service, Cycle time, Auto-Run, process for the line. •Integrated robots programming to the PLC referenced to Material Handlers, Welders, Mig Welders (decisions, areas, zones, etc.) •Troubleshooted complex Automation logic, including Part Tracking, Trunnions, Safety PLC programs and pheneumatic equipment. •Developed HMI's screens using the Cosma template. •Coordinated with robotics, electricians, mechanicals and pheneumatics personal to achieve project goals as expected by costumer in time and quality. •Filled buy-off, safety and automation checklists for costumer. •Gave motivation and supported Jr. controls programmers. •Hands experience with Fanuc Robots (Home, I/Os mapping, Ethernet Comm, DCS, etc.). Controls Programmer for Ford Motor Company's Vehicle Operations (Oakville Assembly Plant. Oakville, Ontario. Canada): •Commissioned production lines, giving PLC support to maintain production running. •Modified PLC/HMI programs to include new car models and systems (CD539, U540) reflected in time and cost. •Cleared their alarm list using PLC debugging techniques. •Optimized their FIS (Factory Information System) in lines for production registrations in PLC's. •Provided reliable, prompt, and courteous service to Ford customer on a 24-hour basis. Controls Programmer for Stackpole (Ancaster, Ontario) Project MHT & A11 (Oil Pump Assembly) • Validated safety systems, I/Os connections, Keyence PP/Length Sensors, Servo Motors and applied changes to the logic process in order to make the stations work as expected. • Used PLC debugging techniques to verify the functionality of the station. • Worked along with the costumer to meet their quality expectations related to dimensional checks. • Run the stations in Dry Cycle and Auto Mode. • Modified HMI screens including alarms using the CX Designer Software. • Gave support on the installation of 3 stations, using Stackpole PLC standard in a CX Omron Controller. Controls Programmer for General Motors (Oshawa, Ontario) K2 BodyShop Support (Cabine, boxes, closures, fenderline and hoodline) •Commissioned production lines, giving PLC support to maintain production running. •Modified PLC/HMI programs related to skids, materials handlings and vision system. •Improved the vision measurement for bolds and car models detection using the Matrox Camera. • Integrated an error proofing system that provides vision results to the repair shop department. • Registered the vision results in an Excel file live data. • Improved the operation of the cells as costumer needs. • Cleared their alarm list using PLC debugging techniques. • Updated the DeviceNet network after cell layout modification.

2011-2012 Weatherford Canada- 3rd Worldwide Company in Oil & Gas Services - Operated a special computer system to collect and analyze complex geological, geophysical, and mechanical readings from sub-surface well logging tools

•Play key role in the programming of PLC's and HMI's in material handling projects. •Coordinate with other disciplines as electricians, robotics, and mechanics to achieve job goals. •Validated system safeties (Light Curtains, Scanners, E-stops, Interlocks) function as designed. •Found out different ways to make more efficient PLC/HMI programming reflected in time and cost. •Implemented pneumatic and electrical connections in the assemble lines. •Implemented a working system for the HMI programming for future projects. •Experience knowledge of communication networks (Devicenet, Ethernet IP). •Integrate robots logic in the PLC programming for the handling of materials.