Heber — Automation Engineer

AAdvance Workbench (Rockwell). 1 year

Telepace Studio, IEC6113-3 from SCADAPack 32 Schneider. 3 Years, SCADAPack 357.

Midland, Tx. Integration Engineer, Site service duties, configuring the compressions systems of PIONEER, reciprocating compressors with Caterpillar engines 16 and 8 valves; standardization of the information send it to the SCADA system. Performing Loop test and configuring the instrumentation in site via MODBUS and/or HART. Reviewing the PLC programs in site for the new projects at WPX, Devon and PIONEER. Commissioning Battery sites along New Mexico, Southwest Texas and North Dakota, I had been responsible of the devices test, programming the whole PLC (Telepace Studio, Studio5000, RSLogix500) and programming as well the HMI (RedLion – Crisom, PanelView-FactoryTalk).

Houston, TX. Develop DCS/PLC and HMI applications as well as project related documentation as assigned by Lead Engineer/Project Manager. Provide support for internal testing and FAT in US office. Carry out site work including Control System commissioning onshore and offshore. Software most used here: Factory Talk view STUDIO, RSLogix 5, RSLogix500, RSLogix5000, STUDIO5000, Prosoft Configuration Builder (PCB Version: 4.3.4), ICONICS, ixDeveloper, AAdvance Workbench, Wonderware Intouch, Wonderware Archestra IDE, FactorTalk VantagePoint. Some experience with: ALTUS (RTU), ScadaPack, Wago, Siemens Step7 Projects: Training provided to technical personnel in instrumentation and control. Topic: "NEUMAN & ESSER COMPRESSOR CONTROL SYSTEMS". Reforma, Chiapas, México at "Cactus" Plant in PEMEX (Petróleos Mexicanos – Mexican Petroleum). January 5th. - January 25th, 2015. Leaded the commissioning to the gas compression project at refinery plant of PEMEX (Tula, Hidalgo Mexico). Costumer NEUMAN & Esser, February 2015. Technical service to the HMI (Human Machine Interface) and PLC (Programmer Logical Controller); site service where some modifications to the HMI & PLC were performed, an analysis was completed to the customer in order to propose a change into the system installed. Grand Chenier, Louisiana. PLAINS Gas Solutions March, April, May & June 2015. Leading the commissioning of the gas compression process, automation system created for NEUMAN & ESSER COMPRESORES at Salina Cruz Oaxaca, México. Train I consist of 3 compressors all signals tested, PLC logic confirmed with some modifications, HMI (Human Machine Interface) fine adjustments. Refinery Plant of PEMEX (Petroleos Mexicanos), subcontracted by ICA-Fluor. August 27th - November 5th, 2015. Successful commissioning service to the automation system developed for CARDON IV at Perla gas field, 3 gas wellheads completed in 100% functionality, all signals tested and "Cause & Effect" confirmed as well. Offshore gas field in the Gulf of Venezuela HMI (FacktoryTalk ME - Rockwell), SCADA (FacktoryTalk SE - Rockwell), PLC (ControlLogix-Rockwell). November 10th – December 10th 2015; January 18th – March 5th 2016; March 16th – April 14th, 2016. https://www.linkedin.com/company/cardon-iv-s.a. Leading and Managing the commissioning to the automation system of the Reciprocity Compressors from NEUMAN & ESSER at "Cactus" PEMEX plant in Reforma Chiapas, Mexico. Several modifications performed at the PLC (ControlLogix L71 Allen Bradley), as well as presenting solutions of Modbus communication between PLC and HYDROCOM. http://www.hoerbiger.com/en-3/pages/77. Technical support to the Startup of the Compressors for a 48hrs of running test with sour gas - June 5th. –July 31th. 2016. Technical Support to Blue Crest Energy http://bluecrestenergy.com/, Cosmopolitan project at Anchor Point, Alaska. Working with the SCADA system from Wonderware Archestra and PLC 1756 ControlLogix from Allen Bradley. February 6th to March 7th. 2017. Leading & Managing the commissioning to the automation system of the Reciprocity Compressors from NEUMAN & ESSER at "Stampede" HESS offshore plant on the Gulf of Mexico http://www.hess.com/operations/offshore/stampede-oil-field. Technical support to the loop-test and cause & effect, Successfully Running of the 2 Sales Gas Compressor at the platform. August 6th-September 25th. Leader at the commissioning to the automation system in the GAS plants of Colombia (Paratebueno & Villavicencio), customer Valerus http://www.snclavalin.com/en/market-services/oil-gas/processing-treating/, end user TGI Colombia https://www.tgi.com.co/. Coordinating the loop and cause and effect test. February 12th. to February 28th. 2018. Successfully performed changes at the design of the controllers (ControlWave & Sylworks) and into the HMI (OpenEnterprise).

Tomball, TX. Develop and design DCS/PLC/SCADA and HMI applications, prepare documentation for the projects assigned according with the ISO-9001 certification. Assure that the products delivered meet the company's philosophy and quality standards established by the company. Houston Fuel Oil Terminal Company. Phase 2 of the project: New signals were added and MODBUS communication were established with new equipment added to the current control system, HMI (ViewX from Schneider). http://www.hfotco.com/ Houston Fuel Oil Terminal Company. Some modifications at the screens were performed in the current application, the complete configuration was trough the SIMATIC WinCC. Software most used here: Factory Talk view STUDIO, RSLogix 5, RSLogix500, RSLogix5000, Wincc, ScadaPack32 Software used but not so often: Siemens Step7

Houston, TX. Develop DCS/PLC and HMI applications as well as project related documentation as assigned by Lead Engineer/Project Manager. Provide support for internal testing and FAT in US office. Carry out site work including Control System commissioning. Ensure that all deliverables conform to international as well as the company's standards. Projects: • Tioga Gas Plant Expansion, Tioga North Dakota: Sep-2013 – Feb-2014 working on an expansion project for a gas plant in ND, USA. Developing the RSLogix program for the Compressors Control, also developing the HMI (Factory Talk) program for 5 local Panels and 5 remote panels there are 2 different areas (Residue and Ethane), Primary customer is Neuman & Esser, end user HESS.http://www.hess.com/default.aspx. • Wellpad Control and Automation, Dickinson North Dakota: Developed HMI (ICONICS Genisis32, Beijer Electronics iXDeveloper) and PLC (Allen Bradley Compact Logix and Control Logix) applications for Wellhead Control and Automation. Completed FAT for applications and automation panels in US Office. Carried out onsite commissioning of panels for Wellpads and also for Gathering Facility. In this project I also participate in a developing of a MCC Room including the wellpad control, this building integrate the PLC controller of Allen Bradley with the same HMI of iXDeveloper, and the HMI of SIEMENS for the MCC buckets the signals reading on this MCC are integrated by Ethernet to the wellpad HMI (ixDeveloper) so now the customer can read the complete information from the wellpad and the MCC (Motor Controller Center).http://www.oxy.com/Pages/Home.aspx. The Arctic Challenger, Bellingham WA: Led a commissioning team on the Well Containment Barge. System included Allen Bradley Control Logix for Process, HIMA PLC for Fire & Gas safety system, and FactoryTalk Site Edition as HMI (Human Machine Interface). Pre-commissioning tests, C&E testing (F&G and Process Safety) and loop checks; provided both hardware and software support. (End User - Shell). http://www.superiorenergy.com/ • BHP Billiton at Pecos Texas (Gas Plant).http://www.bhpbilliton.com/home/Pages/default.aspx Participation at the engineering, leading the programmers, managing FAT (Factory Acceptance Testing), commissioning the application, supervising loop test procedures, etc. Software most used here: Factory Talk view STUDIO, RSLogix 5, RSLogix500, RSLogix5000, STUDIO5000, ixDeveloper. Software used but not so often here: Wonderwere, ALTUS (RTU), ScadaPack, Wago, Siemens Step7.

Monterrey Mexico Consultant automation Engineer. In this company I did work in the next projects: • HR Application. Designing web applications for Human Resources control writing the Control Narrative and Cause & Effect diagrams. End user Symbolik group • Electric Oven. I made the design and program for an automated electric oven, to pre-heat the dies for a plastic injection machine in order to have it ready for production in about 30 minutes. End user DENSO Mexico. • Mercedes Benz. Technical support for the test area of Passenger trucks. Re-design PLC and HMI programs (Allen Bradley). Software most used here: RSLogix 5, RSLogix500, RSLogix5000

Monterrey, Nuevo Leon, Mexico I had been working as an automation expert, developing changes to the automation system developed by the company for the concrete plants of CEMEX. Key Achievements: • Successful leading at the implementation of the plants in CEMEX-USA, CEMEX-UK, CEMX-Egypt. • Create and design a laboratory to improve the test of the automation system. • Successfully training to the CEMEX engineers in South-America (Dominican Republic, Venezuela, Puerto Rico and Panama) for the automation equipment. Software most used here: RSLogix 5, RSLogix500, RSLogix5000. GINCO, FHO. Software developed by NEORIS.

MEXICO I had been working in this company as Maintenance Senior Specialist, Responsible, of 15 maintenance technicians; my principles duties take control, and get plans for Preventive and predictive maintenance for entire machinery, coordinate and follow up the QS9000 procedures and documentation. I'd participate in the TPM (Total Productive Maintenance) implementation, program designed, to improve a Corrective Maintenance system, according with machinery necessities. Responsible also, of machinery's improvement, applying Kaizen and pokayoke systems. Equipment designs for test bench devices and/or machinery. Key Achievements: • Decrease the production breakdown, improving the preventive and predictive maintenance for the production machinery. • Successfully create the design department, building automated equipment to solve the production needs. Software most used here: Factory Talk view STUDIO, RSLogix 5, RSLogix500, RSLogix5000

Monterrey, México I had worked for the Automation department, my main responsibilities were the performance of PLC programs for the control of any automation process. My specialty was to make some calculus sheets to control the energy demand, data based in remotes links, and finally obtain reports from this information.