Rajthilak — Assistant Manager

April 2018 to till date in AEQUS (API Pvt Ltd BELGAUM) Aerospace Processing India Pvt Ltd (API) is a Joint venture between Aequs and Magellan aerospace. The company provides aerospace surface treatments that are not readly available in INDIA. The fully integrated scalable facility is located at Aequs SEZ in Belagavi, Karnataka, India and has been fully functional since 2008. This is the first and only third party facility in india be approved by both Airbus and Boeing. API was the first in India to achieve NADCAP accreditation for chemical processing. Surface enhancement and NDT, which is widely demanded across the aerospace industry. API is also AS9100 Rev D and ISO14001-2004 & OHSAS 18001: 2007 Certified. Key Roles: - In-Charge for the Magentic Particle Inspection(MPI) for machining parts. - In-Charge for the Liquid Penerant Inspection (LPI) for machining and parts. - Approval the product of First Article Inspection and document preparation. - In-house Special Processes Passivation, Chromium, Cadmium, Anodizing, Heat Treatment, Painting, Acid Etching inspection and Conductivity Testing, Grain Flow Testing, Hardness Testing. - Planning and execution of external certification audits for AS9100, NADCAP & Customer audits. - Responsible for preparation of Technical Data Sheet (TDS) for NDT as per the standard requirements and ensure the process compliance as per the approved TDS - Responsible to inspect and qualify the in-house Special Process Production parts & Assembly parts as per the customer drawing requirements with the quality inspection team - Preparation and submission of FAI for Special process as per Customer & Standards. Requirements. - Responsible to inspect and qualify the special process completed incoming parts as per the drawing requirements - Conduct periodic internal audit and ensure the compliance in line with the customer specific standards. The Company: Wipro Enterprises Limited - Aerospace & Defense: Division is one 1. of the leading manufacturer of precision parts for Aerospace landing gear actuator applications and supplies to Messier Bugatti Dowty, CESA, UTAS & Liebherr. In charge for NDT facility in Magnetic Particle Testing & Liquid Penetrant 2. Inspection, Certified NAS 410 Level-2 in MT,PT & ASNT Level-2 in MT,PT & also certified by customer like CESA, Messier Bugatti Dowty, UTAS, Sikrosky,Goodrich (UTC group) in WIPRO aerospace and defense

From AUG '2004 to December 2010 for TITAN INDUSTRIES LTD (Aerospace Division) Bangalore. Titan is one of the leading manufacturers of Aerospace & Hydraulic components manufacturer and supplying of Industries in India and Abroad. It has been certified to ISO9001/2008, AS 9100 Rev B. Key Roles: - Carry out the Magentic Particle Inspection(MPI) for machining parts. - Carry out the Liquid Penerant Inspection (LPI) for machining and parts. - Carry out Final inspection for Aerospace precision parts. - Responsible for raw material inspection. - Responsible for special process inspection like passivation, anodize etc. - Approval the product of First Article Inspection and document preparation. - Interaction with Customers for FAI approval. - Quality plan preparation for machining parts. - Responsible for customer complaints response. - Planning and Organizing for Product Quality Audit. - Responsible for customer complaints handlings and provide the CAPA and monitoring the CAPA effectiveness. - Co-ordinate with customer new products pre-despatch inspection. - Supporting for new product develpment team. - Reduce the inspection lead time. - Co- ordinate with manufacturing team to reduce the in-process rejection and rework. - Member for SGA (Small Group Activities) and 5s team. - Prepare the documents for NADCAP certification program. Achievements - TITAN INDUSTRY LIMITED - Learnt NDT and got certified in ASNT LEVEL-II and NAS 410 LEVEL-II for MPI. - Actively participated in FAI process and developed New Products and got approved by Customers. - Reduced inspection lead time and inspection cost through introduced manual inspection method. - Learned various inspection method and special process products inspection. - Learned Aerospace standards and specification. ACADAMIC CREDENTIALS Qualification Institution Year of passing % of Marks Diploma in mechanical K.S. R I. TECH

Date: 01-02-2019 Regards, Rajthilak.J

3. Jan 2015 to April 2018. Present position: working as an Assistant Manager - Quality Assurance & NDT from In-house Special Processes Passivation, Chromium, Cadmium, Anodizing, Heat 4. Treatment, Painting, Brush Cadmium & Nital Etching 5. Planning and execution of external certification audits for AS9100, NADCAP & Customer audits 6. Implementing & ensuring the special process requirements for Heat treatment (Stress relieving & Hardness testing) & Chemical processing (Painting, Brush Cadmium & Nital Etching) as per NADCAP & Customer standard requirements 7. Responsible for preparation of Technical Data Sheet (TDS) for special process as per the standard requirements and ensure the process compliance as per the approved TDS 8. Responsible to inspect and qualify the in-house Special Process Production parts & Assembly parts as per the customer drawing requirements with the quality inspection team 9. Preparation and submission of FAI/PPAP docs for Special process as per Customer & Std. requirements 10. Conduct periodic internal audit to ensure the process compliance 11. Review the Corrective actions against the nonconformities and ensure effectiveness of implementation 12. Supplier Quality Assurance - Special processes (Heat Treatment, HVOF, Plating & Shot peening) 13. Developing supplier for the special process requirements as per Drawing & Standard requirements 14. Review the Supplier's Part Specific technical data sheet for special processes & approval by FAI audit 15. Responsible to inspect and qualify the special process completed incoming parts as per the drawing requirements 16. Conduct periodic supplier audit and ensure the compliance in line with the customer specific standards

2. Working as a Executive in Quality TATA LOCKHEEDMARTIN AEROSTRUCTURES LIMITED since August 2012 to January 2015. TATA LOCKHEED MARTIN AERO STRUCTURES LTD A Joint Venture between TASL and Lockheed Martin Corp., USA, this company has been established for the assembly of the Empennage & Center Wing-Box for the famous C130-J aircraft which is produced by Lockheed Martin. Tata Lockheed Martin Aero structures facility is export oriented, and the products manufactured form a key aircraft structure that Lockheed Martin integrates and completes for its global C-130 aircraft customers. This project will play a key role in Tata Group's Aerospace initiatives. JOB DESCRIPTION: - 1. Carry out the Liquid Penerant Inspection (LPI) for machining and assembly parts. 2. Established of quality control and chemical lab. 3. Performing the quality test of all shelf life items as per customer requirements. 4. Testing of received shelf life items (consumables, sealant, paint, Adhesive, Primer and chemical solution for NDI process. 5. Handling of paint booth. 6. Training provides to production associates for application of sealant and primer, Alodine and mixing of sealants and primer. 7. Handling to special process as per ASTM and customer specification. 8. To maintain and update the documents for daily activities carried in quality control. 9. Taking care of Operation and maintenance of quality-lab instruments and equipment

3. Working as a Quality Executive at TVS SUNDARAM FASTERNERS LTD, HOSUR From December 2010 to Aug 2012. About TVS - SFL: Sundram Fasteners Limited is a part of the US $5 billion TVS Group, headquartered in Chennai, India. The Company has established a track record of leadership over 40 years. With a diversified product line, world-class facilities in 4 countries and motivated team of talented people, Sundram Fasteners has become a supplier of choice to leading customers. Key Roles: - Responsible for the supplier incoming inspection parts as per customer requirements. - Responsible for the Inprocess Quality for powder metallurgy. - Responsible for lay out inspection for detail machined parts. - Lead for the Inprocess Quality for powder metallurgy and cold extrusion parts. - Responsible for customer complaints. - Responsible for QMS activities. - Responsible for Instruments and gauges calibration planining. - Mointoring the supplier quality rating. - Work together with production team for reducing the scarp and rework. - Responsible for sustaining the delivered quality rating. - Quality plan preparation for machining parts. - Responsible for inspection lead time reduction. - Supporting to meet departmental goals and objectives. 4. Worked as a Quality Inspection engineer in Quality control dept

Engineering TRICHENGODE April 2003 90% M.V.M.H.S.S

H.S.C April 2001 55% METTUR