Micah — Robotics and Controls Engineer

M.Z. Robotics & Controls Inc, January 2017-NOVEMBER 2017 Providing full commissioning and programming of robots from installation to production for KUKA /ABB, at Belvidere Chrysler Plant from Jan till April and for Comau (FANUC) and VDL at the Fremont, CA TESLA plant from April 2017 to October 2017. (KRC 4 ) Also worked closely with PLC controls during debug. i.e I/O Configuration, Nordsen Sealer, weld controller and other peripheral integration. The VDL portion of the project was to program and debug Kuka for the Model 3. Developed programs on and offline to improve efficiency and cycle times. Worked at Magna and Faucia Plants on installations and programming as well on Fanuc and ABB robots. C&A Robotics /Gestamp McCalla, AL March 2016– Dec 2016 Robotic Weld Engineer Providing support for spot welding and MiG welding robots throughout the body shops. Performed touch ups and weld schedule parameter adjustments as needed. Experience with utilizing BOSCH weld timer and the accompanying BOS6000 software. Also, supported maintenance with training and repairs of weld related applications. Helped move robots for shipping during tear downs as well as setting up new robots as attaching end-effectors (FANUC-HENROB RIVET GUN INTEGRATION)

Commissioning, Safe Zones, Hard Limits, Path Teaching, TCP's, Offsets, Load Data, tool changer integration and programming InPro Electric USA, DEC 2017-present Robot Programmer- BMW Spartanburg - Providing commissioning, Integration and programming for the new Body Shop building the new X7 and additional models. (KUKA KRC 4) M.Z. Robotics & Controls Inc, January 2017-NOVEMBER 2017 Providing full commissioning and programming of robots from installation to production for KUKA /ABB, at Belvidere Chrysler Plant from Jan till April and for Comau (FANUC) and VDL at the Fremont, CA TESLA plant from April 2017 to October 2017. (KRC 4 ) Also worked closely with PLC controls during debug. i.e I/O Configuration, Nordsen Sealer, weld controller and other peripheral integration. The VDL portion of the project was to program and debug Kuka for the Model 3. Developed programs on and offline to improve efficiency and cycle times. Worked at Magna and Faucia Plants on installations and programming as well on Fanuc and ABB robots.

M.Z. Robotics & Controls Inc, January 2017-NOVEMBER 2017 Providing full commissioning and programming of robots from installation to production for KUKA /ABB, at Belvidere Chrysler Plant from Jan till April and for Comau (FANUC) and VDL at the Fremont, CA TESLA plant from April 2017 to October 2017. (KRC 4 ) Also worked closely with PLC controls during debug. i.e I/O Configuration, Nordsen Sealer, weld controller and other peripheral integration. The VDL portion of the project was to program and debug Kuka for the Model 3. Developed programs on and offline to improve efficiency and cycle times. Worked at Magna and Faucia Plants on installations and programming as well on Fanuc and ABB robots.

Control Systems Inc. July. 2015 – Feb 2016 Controls Engineer Provide Automation solutions to a variety of industries. Develop electrical layouts, wiring schematics and program software for custom built solutions. Perform testing and commissioning of finished product. AutoCad Electrical trained. Designed electrical panels for a variety industrial applications. Field Service, PLC and VFD (Drive) troubleshooting and installation. Job also entails contacting suppliers for parts and prices, producing job quotes, programming and commissioning of the solution. I’ve programmed Allen Bradly, Siemens PLCs and worked with supporting PLC programming projects in automotive settings. Programmed HMIs, Congnex vision systems, servo motors and other industrial electronic devices. I have knowledge and practical application skills of National Electric Code, ISO and ANSI standards.

C&A Robotics /Gestamp McCalla, AL March 2016– Dec 2016 Robotic Weld Engineer Providing support for spot welding and MiG welding robots throughout the body shops. Performed touch ups and weld schedule parameter adjustments as needed. Experience with utilizing BOSCH weld timer and the accompanying BOS6000 software. Also, supported maintenance with training and repairs of weld related applications. Helped move robots for shipping during tear downs as well as setting up new robots as attaching end-effectors (FANUC-HENROB RIVET GUN INTEGRATION)

C&A Robotics /Gestamp McCalla, AL March 2016– Dec 2016 Robotic Weld Engineer Providing support for spot welding and MiG welding robots throughout the body shops. Performed touch ups and weld schedule parameter adjustments as needed. Experience with utilizing BOSCH weld timer and the accompanying BOS6000 software. Also, supported maintenance with training and repairs of weld related applications. Helped move robots for shipping during tear downs as well as setting up new robots as attaching end-effectors (FANUC-HENROB RIVET GUN INTEGRATION) Control Systems Inc. July. 2015 – Feb 2016 Controls Engineer Provide Automation solutions to a variety of industries. Develop electrical layouts, wiring schematics and program software for custom built solutions. Perform testing and commissioning of finished product. AutoCad Electrical trained. Designed electrical panels for a variety industrial applications. Field Service, PLC and VFD (Drive) troubleshooting and installation. Job also entails contacting suppliers for parts and prices, producing job quotes, programming and commissioning of the solution. I’ve programmed Allen Bradly, Siemens PLCs and worked with supporting PLC programming projects in automotive settings. Programmed HMIs, Congnex vision systems, servo motors and other industrial electronic devices. I have knowledge and practical application skills of National Electric Code, ISO and ANSI standards.

C&A Robotics /Gestamp McCalla, AL March 2016– Dec 2016 Robotic Weld Engineer Providing support for spot welding and MiG welding robots throughout the body shops. Performed touch ups and weld schedule parameter adjustments as needed. Experience with utilizing BOSCH weld timer and the accompanying BOS6000 software. Also, supported maintenance with training and repairs of weld related applications. Helped move robots for shipping during tear downs as well as setting up new robots as attaching end-effectors (FANUC-HENROB RIVET GUN INTEGRATION)

M.Z. Robotics & Controls Inc, January 2017-NOVEMBER 2017 Providing full commissioning and programming of robots from installation to production for KUKA /ABB, at Belvidere Chrysler Plant from Jan till April and for Comau (FANUC) and VDL at the Fremont, CA TESLA plant from April 2017 to October 2017. (KRC 4 ) Also worked closely with PLC controls during debug. i.e I/O Configuration, Nordsen Sealer, weld controller and other peripheral integration. The VDL portion of the project was to program and debug Kuka for the Model 3. Developed programs on and offline to improve efficiency and cycle times. Worked at Magna and Faucia Plants on installations and programming as well on Fanuc and ABB robots. Control Systems Inc. July. 2015 – Feb 2016 Controls Engineer Provide Automation solutions to a variety of industries. Develop electrical layouts, wiring schematics and program software for custom built solutions. Perform testing and commissioning of finished product. AutoCad Electrical trained. Designed electrical panels for a variety industrial applications. Field Service, PLC and VFD (Drive) troubleshooting and installation. Job also entails contacting suppliers for parts and prices, producing job quotes, programming and commissioning of the solution. I’ve programmed Allen Bradly, Siemens PLCs and worked with supporting PLC programming projects in automotive settings. Programmed HMIs, Congnex vision systems, servo motors and other industrial electronic devices. I have knowledge and practical application skills of National Electric Code, ISO and ANSI standards.

InPro Electric USA, DEC 2017-present Robot Programmer- BMW Spartanburg - Providing commissioning, Integration and programming for the new Body Shop building the new X7 and additional models. (KUKA KRC 4) M.Z. Robotics & Controls Inc, January 2017-NOVEMBER 2017 Providing full commissioning and programming of robots from installation to production for KUKA /ABB, at Belvidere Chrysler Plant from Jan till April and for Comau (FANUC) and VDL at the Fremont, CA TESLA plant from April 2017 to October 2017. (KRC 4 ) Also worked closely with PLC controls during debug. i.e I/O Configuration, Nordsen Sealer, weld controller and other peripheral integration. The VDL portion of the project was to program and debug Kuka for the Model 3. Developed programs on and offline to improve efficiency and cycle times. Worked at Magna and Faucia Plants on installations and programming as well on Fanuc and ABB robots. C&A Robotics /Gestamp McCalla, AL March 2016– Dec 2016 Robotic Weld Engineer Providing support for spot welding and MiG welding robots throughout the body shops. Performed touch ups and weld schedule parameter adjustments as needed. Experience with utilizing BOSCH weld timer and the accompanying BOS6000 software. Also, supported maintenance with training and repairs of weld related applications. Helped move robots for shipping during tear downs as well as setting up new robots as attaching end-effectors (FANUC-HENROB RIVET GUN INTEGRATION) Mercedes-Benz Mechatronics Program/ Mercedes Benz US International January 2012- March 2015 Maintenance Tech Co-Op, Robot Cell Operator Body Shop Worked with team members to perform various jobs in all shops around the plant Implemented continuous improvement throughout the plant with various projects. Continual learning of the process system that Mercedes uses to build their automobiles from start to finish. Worked as a Maintenance Technician Apprentice and learned proper procedures for plant shut-down and start-up, preventative maintenance and troubleshooting of PLCs, robotics, motors, drives etc.

InPro Electric USA, DEC 2017-present Robot Programmer- BMW Spartanburg - Providing commissioning, Integration and programming for the new Body Shop building the new X7 and additional models. (KUKA KRC 4) M.Z. Robotics & Controls Inc, January 2017-NOVEMBER 2017 Providing full commissioning and programming of robots from installation to production for KUKA /ABB, at Belvidere Chrysler Plant from Jan till April and for Comau (FANUC) and VDL at the Fremont, CA TESLA plant from April 2017 to October 2017. (KRC 4 ) Also worked closely with PLC controls during debug. i.e I/O Configuration, Nordsen Sealer, weld controller and other peripheral integration. The VDL portion of the project was to program and debug Kuka for the Model 3. Developed programs on and offline to improve efficiency and cycle times. Worked at Magna and Faucia Plants on installations and programming as well on Fanuc and ABB robots. C&A Robotics /Gestamp McCalla, AL March 2016– Dec 2016 Robotic Weld Engineer Providing support for spot welding and MiG welding robots throughout the body shops. Performed touch ups and weld schedule parameter adjustments as needed. Experience with utilizing BOSCH weld timer and the accompanying BOS6000 software. Also, supported maintenance with training and repairs of weld related applications. Helped move robots for shipping during tear downs as well as setting up new robots as attaching end-effectors (FANUC-HENROB RIVET GUN INTEGRATION) Control Systems Inc. July. 2015 – Feb 2016 Controls Engineer Provide Automation solutions to a variety of industries. Develop electrical layouts, wiring schematics and program software for custom built solutions. Perform testing and commissioning of finished product. AutoCad Electrical trained. Designed electrical panels for a variety industrial applications. Field Service, PLC and VFD (Drive) troubleshooting and installation. Job also entails contacting suppliers for parts and prices, producing job quotes, programming and commissioning of the solution. I’ve programmed Allen Bradly, Siemens PLCs and worked with supporting PLC programming projects in automotive settings. Programmed HMIs, Congnex vision systems, servo motors and other industrial electronic devices. I have knowledge and practical application skills of National Electric Code, ISO and ANSI standards. Mercedes-Benz Mechatronics Program/ Mercedes Benz US International January 2012- March 2015 Maintenance Tech Co-Op, Robot Cell Operator Body Shop Worked with team members to perform various jobs in all shops around the plant Implemented continuous improvement throughout the plant with various projects. Continual learning of the process system that Mercedes uses to build their automobiles from start to finish. Worked as a Maintenance Technician Apprentice and learned proper procedures for plant shut-down and start-up, preventative maintenance and troubleshooting of PLCs, robotics, motors, drives etc. Apple Computer June. 2007 - October. 2009 Retail sales for Apple Computers; excellent Customer Service required; extensive product knowledge and troubleshooting skills necessary; detailed knowledge of Apple Brand software

InPro Electric USA, DEC 2017-present Robot Programmer- BMW Spartanburg - Providing commissioning, Integration and programming for the new Body Shop building the new X7 and additional models. (KUKA KRC 4) C&A Robotics /Gestamp McCalla, AL March 2016– Dec 2016 Robotic Weld Engineer Providing support for spot welding and MiG welding robots throughout the body shops. Performed touch ups and weld schedule parameter adjustments as needed. Experience with utilizing BOSCH weld timer and the accompanying BOS6000 software. Also, supported maintenance with training and repairs of weld related applications. Helped move robots for shipping during tear downs as well as setting up new robots as attaching end-effectors (FANUC-HENROB RIVET GUN INTEGRATION) Mercedes-Benz Mechatronics Program/ Mercedes Benz US International January 2012- March 2015 Maintenance Tech Co-Op, Robot Cell Operator Body Shop Worked with team members to perform various jobs in all shops around the plant Implemented continuous improvement throughout the plant with various projects. Continual learning of the process system that Mercedes uses to build their automobiles from start to finish. Worked as a Maintenance Technician Apprentice and learned proper procedures for plant shut-down and start-up, preventative maintenance and troubleshooting of PLCs, robotics, motors, drives etc.

M.Z. Robotics & Controls Inc, January 2017-NOVEMBER 2017 Providing full commissioning and programming of robots from installation to production for KUKA /ABB, at Belvidere Chrysler Plant from Jan till April and for Comau (FANUC) and VDL at the Fremont, CA TESLA plant from April 2017 to October 2017. (KRC 4 ) Also worked closely with PLC controls during debug. i.e I/O Configuration, Nordsen Sealer, weld controller and other peripheral integration. The VDL portion of the project was to program and debug Kuka for the Model 3. Developed programs on and offline to improve efficiency and cycle times. Worked at Magna and Faucia Plants on installations and programming as well on Fanuc and ABB robots.

C&A Robotics /Gestamp McCalla, AL March 2016– Dec 2016 Robotic Weld Engineer Providing support for spot welding and MiG welding robots throughout the body shops. Performed touch ups and weld schedule parameter adjustments as needed. Experience with utilizing BOSCH weld timer and the accompanying BOS6000 software. Also, supported maintenance with training and repairs of weld related applications. Helped move robots for shipping during tear downs as well as setting up new robots as attaching end-effectors (FANUC-HENROB RIVET GUN INTEGRATION)

Developed automated manufacturing solutions using A.I. and Machine Learning technology to build electrical components. Current projects include using A.I. Vision technology to build batteries and EECs for Daimler Berlin- Marienfelder. The system utilizes an S7 PLC and Universal Robot to construction the electrical components. Oversaw two projects at Hoppecke Battery (Brilon Germany) using robots to construct batteries in production settings. Aid the customer in realizing the automation solution through design, engineering, programming, planning and on-site support. Also adhering to all customer requests (i.e. cycles times, running efficiency etc. Performed R&D and Proof of Concept for various task before they were implemented into production tasks. Designed and 3D printed custom test parts and robot end-effectors for customers and lab experiments. Produced training material used for customer/ end user training (Training Videos, Presentations and Manuals) Provided online and in person application training for customer specific task Developed steps documentation for project management guidelines for realizing an AI driven Robotic solution. Test product releases on supported robot platforms along with accompanying peripherals Work alongside Infra team to find potential bugs when performing lab evaluations and testing Write bug reports in JIRA based on findings with supporting documentation. Designed standardized processes and protocols to continuously improve operational efficiency through positive iteration. Supported DevOps integration to align software development and engineering efforts. Outlined and programmed routines and parameters for different robotic systems (UR,ABB,Fanuc)

Currently working on an integration project, introducing a new model into and line while optimizing the other car types cycle times, weld quality and overall efficiency. My job entails creating setting up Robot safety zones, configuring peripherals to robot controllers ( grippers, weld guns, Festo Blocks, Nimek end effectors), creating and or testing Tool center points (TCPs), setting software and hard limits when applicable, programming new and verifying pre-existing robot paths and ensuring that zones are set to avoid unsafe operator scenarios or crashes. I have become proficient with Fanuc, Kuku and ABB robots from past experience and formal education. Aside from my knowledge of robotics; I am proficient in PLC programing and debug and oftentimes am called upon during debug and early production to ensure robot and PLC I/O are in synch and communicating properly. I have also been improving skill in RoboGuide, WorkVisual and RobotStudio to utilize offline capabilities of robotic systems. Recently, I just completed I project in which I programmed an ABB in an application for heat treating various substrates with a gas torch end-effector using this offline technology.

Provide support for spot welding and MiG welding robots throughout the shop. Performed touch ups and weld schedule parameter adjustments as needed. Experience with utilizing BOSCH weld timer and the accompanying BOS6000 software. Also, supported maintenance with training and repairs of weld related applications. Helped move robots for shipping during tear downs as well as setting up new robots as attaching end-effectors (FANUC-HENROB RIVET GUN INTEGRATION)

Provide Automation solutions to a variety of industries. Develop electrical layouts, wiring schematics and program software for custom built solutions. Perform testing and commissioning of finished product. AutoCad Electrical trained. Field Service, PLC and VFD (Drive) troubleshooting and installation. Job also entails contacting suppliers for parts and prices, producing job quotes, programming and commissioning of the solution.

Worked with team members to perform various jobs in all shops around the plant Implemented continuous improvement throughout the plant with various projects. Continual learning of the process system that Mercedes uses to build their automobiles from start to finish. Worked as a Maintenance Technician Apprentice and learned proper procedures for plant shut-down and start-up, preventative maintenance and troubleshooting of PLCs, robotics, motors, drives etc.