Lee — Controls Engineer

-Worked for Engineering in the research and development of custom designed robotic systems.

-Allen Bradley's PLC Diagnostic and Programming. -PLC diagnostics and editing.

-Supervised the development stages of the first prototype custom design robotic valu-system lamination and imaging system developed for DuPont Company used by the military government.

Performed Preventive Maintenance, calibrations, and Performance Verifications in GMP Environment on critical and non critical Instruments under SOP.

-Performed online, phone, and desktop technical support to customers resolving any problem with their equipment quickly as possible without any periods of unnecessary downtime for customers. -Help the customer resolve any problems quickly as possible without any period of downtime -Problem solving from PLC.

4 years of controls/automation project engineering with budgeting project experience in GMP Environments. Handled complete project cycle including integrated system testing, startup/commissioning and final system acceptance.

-Performed all electrical and electronics testing of PCBs and components as quality control verification. -Worked in quality control inspecting Electronic printed circuit boards

-8 years of Robotic system experience for plant and Lab automation and GMP Environment -Integrate, install, qualify, demo robotic instrument validations. -Test robotic systems for capabilities

-Managed all safety procedures on site. -Conducted safety training for all the employees for Zymark in Delaware. -Established the bylaws and implemented into the company policies according to OSHA company standards and the Dept. of Labor Laws. Each month a safety meeting was conducted.

-Troubleshoot equipment for pharmaceutical lab automation industry. -Advance training in electronic troubleshooting to bare component level.

-All equipment was programmed from Allen Bradley PLC'S using Rockwell Automation software versions 20 and 21. -Maintained products under annual service contracts for the customers in the Drug Discovery, Hospital Clinical, Universities, and Robotic lab automation industry

-Experience with control system hardware and panel design and field instrumentation. -Supervised the development stages of the first prototype custom design robotic valu-system lamination and imaging system developed for DuPont Company used by the military government. -Worked for Engineering in the research and development of custom designed robotic systems.

-4 years of controls/automation project engineering with budgeting project experience in GMP Environments. -Worked for Engineering in the research and development of custom designed robotic systems.

-Extensive field service experience, travelled extensively to client sites as needed

-Wonderware, RSView, Panelview, FactoryTalk. -Panel view HMI's were created using Factory talk manager, and developed in Factory talk view studio.

-Performed Preventive Maintenance, calibrations, and Performance Verifications in GMP Environment on critical and non critical Instruments under SOP. -Preventive Maintenance such calibrations, replacing of liquid flow tubing, valves, servo and stepper motors, and syringes on all supported Instruments manufactured by the manufacture following GMP guideline.

-8 years of Robotic system experience for plant and Lab automation and GMP Environment. -Validate software procedures of specification qualifying robotic system for site acceptance (FAT) Factory Acceptance Testing. -Install, setup, and test robotic systems for capabilities.

-8 years of Robotic system experience for plant and Lab automation and GMP Environment -Integrate, install, qualify, demo robotic instrument validations. -Test robotic systems for capabilities

Replacing liquid flow tubing, valves, syringes, stepper and servo motors.

-Develop programs to control the operation of OEM machine equipment manufactured by NETZSCH Premier Technologies in the Milling, Grinding, and Pumps industry. -All equipment was programmed from Allen Bradley PLC'S using Rockwell Automation software versions 20 and 21. Equipment programming were developed by using SLC/04, SLC/05, and Micologix 1100 CPU's for program developed using RSLogix500 programs for older instrument. -Newer equipment were programmed by using RSLOGix5000 platform with processors Compactlogix 1769- L16ER, 1769-L353, 1768-L43, and the L232EM All communication setups were done using RSLinx classic. -Panel view HMI's were created using Factory talk manager, and developed in Factory talk view studio. -I also had to do program conversions from SCL/500 to RSLOGIX 5000. Other programs used were direct soft and Proface ladder logics.

-Perform service to all equipment on the facility. Services performed were scheduled preventive maintenances, install of new equipment, break down of old equipment. -Heavy Allen Bradley PLC environment, including SCL 500 and compact logic PLC programming, description updates, changeovers, and problem solving from PLC. PLC'S used were Allen Bradley SLC 500 /RSLogix 5000 platform, including RSLinx driver communications. Siemens used were PCS7 platform. -Worked on daily silos, shakers, vibrators, magnets, X-Rays, metal detectors, truck scales, RTO'S, and Industrial robots.

-Install, troubleshoot, and maintain equipment for pharmaceutical lab automation industry. -Performed Preventive Maintenance, calibrations, and Performance Verifications in GMP Environment on critical and non critical Instruments under SOP. -Replacing liquid flow tubing, valves, syringes, stepper and servo motors, Electronic board modules, Siemens PLC'S, Allen Bradley's PLC Diagnostic and Programming. -Types of Systems trained and worked on were Beckman Coulters, AB SCIEX 150, 4000, 5000 Mass Spectrometry, Teledyne Comb flash RF Fraction collectors, Genevac HT2, EZ2 Plus, Agilent HPLC 1100 and 1200, Gilsons, Leaps, Genesis Liquid Handling Robotics Systems, etc. -How to order new parts from Parts and Vendors and to install them and perform operational test to insure parts are correctly functional and reliable in a GMP environment. -Instructed customers how to use software capabilities with their instrument to insure comfort and confidence while operating the instrument through SOP. -Traveled to customer sites domestic, and internationally to setup instrument, qualify the instrument, and perform scheduled method runs and Validate software procedures of specification qualifying robotic system for site acceptance (FAT) Factory Acceptance Testing. -Performed online, phone, and desktop technical support to customers resolving any problem with their equipment quickly as possible without any periods of unnecessary downtime for customers. -Established good interaction with customers and company.

-Integrate, install, qualify, demo robotic instrument validations, and teach customers how to use the software capabilities to run application and edit them. -Maintained products under annual service contracts for the customers in the Drug Discovery, Hospital Clinical, Universities, and Robotic lab automation industry. Some of these customers were Eli Lilly, Bayer, Merck, Astra Zeneca, Glaxo Smith Kline, and DuPont. -Trained new service technicians to install, setup, and test robotic systems for capabilities and PLC diagnostics and editing. How to perform Preventive Maintenance such calibrations, replacing of liquid flow tubing, valves, servo and stepper motors, and syringes on all supported Instruments manufactured by the manufacture following GMP guideline. -Ordered new parts and installed to install to perform operation, and GMP testing to insure parts are correctly functional and reliable. -Traveled up to 90% as a Field service Engineer to customer sites domestic and international to setup instruments and qualify instruments for acceptance. -Performed online and phone technical support for customers to help the customer resolve any problems quickly as possible without any period of downtime

-Worked for Engineering in the research and development of custom designed robotic systems. -Performed all electrical and electronics testing of PCBs and components as quality control verification. -Implemented the electronics technology with software technology in robotic application software that resulted in Automated Liquid Handling capabilities. -Managed all safety procedures on site. Since 1998, I conducted safety training for all the employees for Zymark in Delaware. -Established the bylaws and implemented into the company policies according to OSHA company standards and the Dept. of Labor Laws. Each month a safety meeting was conducted.

-Worked in quality control inspecting Electronic printed circuit boards specially designed by DuPont Company Research and Development Engineering facility. -Supervised the development stages of the first prototype custom design robotic valu-system lamination and imaging system developed for DuPont Company used by the military government. -DuPont had a contract to build 11 units for the government in a period of 6 years; I remained on the project until it was completed in 1994 as the technical supervisor. -Serve as the coordinator of the DuPont safety committee, and in 1997 I received a letter for perfect attendance in 1996.