John — Robot Programmer Programmer of ABB IRC5 Robots

Ranal (KUKA) Chesterfield June 2009 - June 2010 Robot Programmer Programmer of ABB IRC5 Robots for a Chrysler project. Commissioned robot, installed software,simulation, binding table, Calibrate, Tested. Completed check off sheet for each robot. Taught the positions for material handlers and weld robots. Made ready to run in Auto

Valentine Robotics Sterling Heights, MI January 2006 - July 2008 Automation Engineer Duties include ABB and Fanuc programming. Also perform Robot Electrical and Mechanical maintenance. Support for new installations. Robot training at customer site. Inhouse work includes training curriculum developement, or internal training. Attended training for both ABB S4 and Fanuc RJ2 & RJ3 Programming and Electrical

CitiStaff (ABB ROBOTICS) Auburn Hills, MI June 2004 - July 05 Robot Programmer Worked for Body and White as a robot programmer on the PMMK Project. Responsible for (1) Installing most current version of software (2) Debug, Calibrate and Test new robots (3) Install simulation software (4) program material handlers, welders (5) Build specified number of bodys for the project. Contract ended Jan 2006

Argus & Associates Contract Co. (FANUC ROBOTICS) Rochester Hills, MI March 2003 - April 2004 Field Service Engineer Worked in the Customer Resource Center. I was responsible for troubleshooting and repairing down robots. I serviced robots throughout the country. Repairs could be mechanical, electrical, software or hardware related. I also did preventative maintenance (Which included greasing the robot, changing the batteries, and backing up controller files). When there were no service calls I would work in house on reworks, robots sent in by the customer to be repaired, or in the parts department. Contract ended April 2004

ROBOTICS PRODUCTION TECHNOLOGY ( RPT ) Auburn Hills, MI Aug 2001-Feb 2002 Field Service Engineer Worked in the Installation/Service Department. Worked with Fanuc robotics systems that use the Jetware application for cutting a variety of different parts with high pressure water. Also worked with high pressure compressors (Intensifiers). My responsibilities included loading software, programming, electrical and mechanical troubleshooting, and repair, inhouse and in the field. I programmed robots to do test cuts on parts to determine the best robot speed, water pressure and orifice size. Did all the fixture mastering on the M710-I robots. Contract ended Feb 2002

Aerotek Contract Co. (FANUC ROBOTICS)) Rochester Hills, MI August 1999 - June 2001 Field Service Engineer Worked in the Installation Department. Was assigned to a project in the field to assist in the installation of Fanuc Robotic Systems. I was also assigned to various build shops in state and out to do software upgrades, devicenet grounding, and other mechanical and electronic jobs. Went through classes at Fanuc to learn more about troubleshooting the robot and controller. Also learned basic programming and much concerning the teach pendant. Contract ended June 2001. Oct. 1994 - Feb. 1999 New Dimensions Contract Co. (FANUC ROBOTICS) Rochester Hills, MI Robotics Technician I worked at Fanuc Robotics on the manufacturing floor. My duties included setting up the robot and controller, load all software including options. Set all hardware and software limits and run a series of tests to insure a problem free robot and controller before being shipped to the customer. In the Retrofit department I made customer requested changes such as short to long arm conversions, cable changes, new air lines, remote to integrated controller change. I worked for two years in the Panel wiring department and was promoted to lead technician. Our group was responsible for wiring all controllers for paint and weld robots. Contract ended February 1999