NC Programmer/PLC Technician — Closed

NC Programmer/PLC Technician contract in Webberville, Michigan, paying $62.80/hr.

Automate America is where skilled professionals find work and companies hire them.

CLOSED

Job Description

Automate America has a project in Webberville, MI and we are looking for a local PLC programmer that has a strong knowledge of Sinumerik Commissioning. The programmer must also have a strong knowledge of NC programming as well.

The programmer must be proficient with Siemens S7 (STL) and have a strong knowledge of PROFIBUS, PROFINET, ASi Networks, and EUCHNER safety devices.

Summary of Work:

2-spindle line boring machine Type Linetec

Siemens S7 Technology

Sinumerik 840 D

Operation: Station panel OP010 with PCU 50. The station panel is integrated into a mobile control console. On-Board interface Ethernet TCP/IP

Control cabinet: The control cabinets for the machining units with PLC/NC control, drive controllers and feeders will be free-standing.
Air conditioning according to the thermal load, if required, through cooler units working without CFCs, mounted on the roof from the control cabinet.
Height: 2000mm plus base,
Depth: 500mm,
Width: acc. to the complexity of the control task
Painting: interior and exterior painting RAL 7035
Mounting plates and connector partition walls galvanized

Drive technology: Digital axis controllers with mains module capable of recovering energy,
Type: Siemens SIMODRIVE 611 D.
Digital three-phase axis servo motors type SIEMENS 1 F T 6.../ 1 F K 7...
Standard three-phase motors as spindle motors
Digital interface between NC and drive controllers.

Coupling: For interlinkage. Safety circuits hardware. DP/DP couplers for software signals

Monitoring: Machine malfunctions (end positions, pressure switches, float switches), Excessive heating up (motors, controllers, the interior of the electric cabinet), Overload (motors, load circuits, power supply), Operating and programming errors (through the NC control), Self-monitoring of the NC and the PLC

EPS interface: The machine is provided with the hardware and software for connection to the existing plant network

Set-up machining operations: In a special mode (Safety Integrated Step 1 ) the slides of one unit can be controlled manually at reduced speed while the safety doors are open. It is not possible to switch on the spindle(s), to run an automatic sequence or to carry out a workpiece transport.

Installation: If possible, units moved during machine operation will be connected via cable supporting gear. Up to a cable length of 10m, the cables are firmly connected. Unless there are standard connectors provided at the motor, servo and main spindle motors are always firmly connected without further adapter plugs.

Long-lasting markings on both sides identify all plug & socket connections. The single cores will not be identified.

Looking for local programmers only. Expenses are not included and must be paid by the contractor.

Mandatory Personal Requirements:

ID for the resource (PDF format in color)

A valid letter of NO criminal records. (PDF FORMAT)

A photo of him/her on color, with a white background (JPG FORMAT).

A photo of his/her signature with a blue color pen with white background (JPG FORMAT).

A copy of the Policy of his/her Private Medical Insurance of their own (HE/SHE must be the holder and the MI it has to cover WORK ACCIDENTS. PDF FORMAT).

Per Diem$50.00
Hotel$120.00

Eligibility Questions answered when you apply

  1. Are you authorized to work in the US?Required
  2. Can you pass a background check?Required30 days
  3. Are you in close proximity to Webberville, Michigan?
  4. Are you proficient with Siemens Sinumerik 840D?
  5. Are you proficient with Siemens S7?
  6. Do you have knowledge of Euchner systems?
  7. Do you have knowledge of Profibus, Profinet and ASi?
Describe your experience with Sinumerik 840D.
Describe your experience with Siemens S7.
What experience do you have with NC programming?
S7, Sinumerik 840DGood-to-haveMust have strong knowledge with Sinumerik 840D Commissioning and strong Siemens S7 knowledge.
EUCHNERGood-to-haveMust have knowledge of EUCHNER Safety Devices
ProfiBus, AS-iGood-to-have
ComputerBasic Electrical ToolsBasic Hand ToolsLockout Tagout Kit
CNC
Approved timesheets and expense reports must be submitted to Diverse Automation ( ) each Sunday night. Expense reports must be signed by the customer representative and include receipts.

The work, as it was posted

NC Programmer/PLC Technician in Webberville, MI.

Posted November 27, 2018, with an estimated end of December 22, 2018, about 4 weeks of work.

This contract is closed.

Skills and requirements as posted: EUCHNER, Profinet, Siemens, Basic Electrical Tools, Basic Hand Tools, Computer, Lockout Tagout Kit.

Posted rate: $62.80/hr.

This contract is closed

Posted November 27, 2018 · Est. end December 22, 2018

Open work like this

All open work

Related professionals

  • SteveRobot Programmer · St. Clair Shores, MI
  • BradleyRobot Programmer · Clarkston, Michigan
  • SamuelRobot Programmer · Sterling heights, MI
  • STEPHENRobot Programmer · Utica, Michigan
  • AlexeiRobot Programmer · Farmington Hills, MI
  • AnthonyTechnical Project Manager · Commerce Twp., MI
  • JaspalRobot Programmer · Sterling Heights, Michigan
  • SammyRobot Programmer · Ann Arbor, Michigan