What Does Each Open Automation Contract Pay Today? Ten Posted Rates

Ten contracts are open today, Friday, November 20, 2026, with posted base rates from $44 to $72 an hour in Michigan, South Carolina, Ohio, North Carolina and British Columbia. Each one is listed with its role, place, posted rate, start and who it suits, plus a link to its own page.

Ten open contracts with their posted hourly rates shown on layered plates over a robot cell

Ten contracts are open on Automate America today, Friday, November 20, 2026, and their posted base rates run from $44 to $72 an hour. Each one below shows its role, place, posted rate, when it starts and who it suits, as its own page reads this morning. The pages are linked so you can read the whole posting before you decide. Automate America is a free, fair and open marketplace for skilled professionals of every trade, and the rate you see is the rate you're paid.

On this page

How should you read this list?

The contracts are listed by posted base rate, from $72 down to $44. The order is only the rate; it says nothing about which contract is better for you. Overtime and double time are shown where the posting shows them, and a contract that lists one rate is shown with one rate. A start date is given only where the page carries a future one; where a page reads ASAP or ongoing, that is what is written here. Every figure comes from the contract's public page, read this morning, and a contract that stops reading open and right leaves the list. The full open contracts list always shows the current set.

What does the robot programmer contract in Auburn Hills pay at $72 an hour?

Contract 4346 is a robot programmer opening in Auburn Hills, Michigan, onsite. The posted base rate is $72 an hour, with $100.80 overtime and $129.60 double time. It starts ASAP.

Who is it for? A professional with FANUC robot programming, teaching and commissioning experience on automotive automation projects.

What does the ongoing robot programmer contract in Spartanburg pay?

Contract 4313 is a robot programmer opening in Spartanburg, South Carolina, onsite. The posted base rate is $72 an hour, with $88 overtime and $112 double time. It is ongoing.

Who is it for? An ABB robot programmer for maintenance and repairs on a running dispensing and riveting cell, plus some cycle-time improvement. The posting lists a $220 per diem for days worked, available to those living outside the standard 50 mile radius from the site.

What does the robot programmer contract in Wixom and Toledo pay?

Contract 4129 is a robot programmer opening in Wixom, Michigan, and Toledo, Ohio, onsite. The posted base rate is $64 an hour, with $80 overtime and $80 double time. It starts ASAP.

Who is it for? A FANUC robot programmer with hands-on 3D vision integration and troubleshooting experience. The posting places the first weeks in Wixom and the time after in Toledo.

What does the material handling robot programmer contract in Auburn Hills pay at $64?

Contract 3636 is a material handling robot programmer opening in Auburn Hills, Michigan, onsite. The posted base rate is $64 an hour, with $96 overtime and $96 double time. It starts ASAP.

Who is it for? An ABB robot programmer who can take a simulation all the way through to the plant.

What does the Auburn Hills robot programmer contract that starts December 14 pay?

Contract 4363 is a material handling robot programmer opening in Auburn Hills, Michigan, onsite. The posted base rate is $64 an hour, with $96 overtime and $96 double time. It starts December 14, 2026.

Who is it for? A FANUC robot programmer who can set up 3D vision for material handling applications.

What does the PLC and HMI programmer contract in Wixom pay?

Contract 4353 is a PLC and HMI programmer opening in Wixom, Michigan, onsite. The posted base rate is $60 an hour. It starts ASAP.

Who is it for? A controls professional who can review and modify existing PLC programs and HMI screens as three workstations receive new fixtures. The page shows one rate, with no overtime or double time listed.

What does the robot weld technician contract in Spartanburg pay?

Contract 4335 is a robot weld technician opening in Spartanburg, South Carolina, onsite. The posted base rate is $60 an hour, with $77.60 overtime and $96 double time. It starts ASAP.

Who is it for? A technician with ABB robotics, electrical, basic mechanical and PLC skills, for an assembly cell with spot welding. The posting lists a $220 per diem for days worked, available to those living outside the standard 50 mile radius from the site.

What does the robot programmer contract to hire in Lake Orion pay?

Contract 4336 is a material handling robot programmer opening in Lake Orion, Michigan, onsite. The posted base rate is $52 an hour, with $62.40 overtime and $62.40 double time. It starts November 23, 2026. It is a contract to hire: the customer can bring the professional on full time after the contract, with no placement fee and no conversion fee.

Who is it for? A FANUC robot programmer for material handling robots, working locally with installs on other sites.

What does the controls engineer contract to hire in Vancouver pay?

Contract 4246 is a controls engineer opening in Vancouver, British Columbia, Canada, onsite. The posted base rate is $52 an hour, with $78 overtime. It starts ASAP. It is a contract to hire: the customer can bring the professional on full time after the contract, with no placement fee and no conversion fee.

Who is it for? A controls engineer for commissioning support at a high-volume material handling facility: I/O checkout, functional validation, drive and motor controller configuration, and network configuration.

What does the machine builder contract to hire in Charlotte pay?

Contract 4315 is a machine builder opening in Charlotte, North Carolina, onsite. The posted base rate is $44 an hour, with $54.40 overtime and $80 double time. It starts ASAP. It is a contract to hire: the customer can bring the professional on full time after the contract, with no placement fee and no conversion fee.

Who is it for? A machine builder for fabrication, machining and assembly of equipment on each assigned project, plus tryout and runoff of machinery.

Contract 4353 is currently boosted. A boost places a posting higher in the feed, in the listings and in the search results it matches; it does not guarantee a position.

How do you apply?

Open the contract's page and apply at the posted rate. Applying is not signing a work agreement: you are committed to the work only when you accept an offer, and if the customer shortlists you, they can see your contact details. A professional who does not have a profile yet can register on Automate America with a name, an email, a phone number and a password, then build a profile that shows finished contracts, ratings and reviews. Customers can also search the professionals directory and companies directory directly.

Professionals who want to keep their skills current have free and paid options from the makers themselves, such as FANUC America's training, Siemens SITRAIN and ISA training. For more on how robot programmers fit into current plant projects, read ABB robotics, SoftBank and the programmers plants still need and Schneider Electric's agreement to buy Cognite and PTC. More posts are on the Automate America blog.

Is it free to post a contract?

Yes. A customer posts a contract, a job or an RFQ free on the post-work page and chooses the rate it posts at. There is no negotiating: the rate you see is the rate you're paid. A customer can also post anonymously, and the public never sees who posted it. Applying is free for professionals, and hiring is free for customers. A contract to hire lets a customer try a professional on real work first, with no placement fee and no conversion fee.

Which questions does this post answer?

How many contracts are open today, and what do they pay?

Ten contracts read open on Friday, November 20, 2026, with posted base rates from $44 to $72 an hour.

Is applying the same as signing a work agreement?

No. You apply at the posted rate, and you are committed to the work only when you accept an offer.

Which of the ten are contracts to hire?

Contracts 4336 in Lake Orion, 4246 in Vancouver and 4315 in Charlotte. A customer that brings the professional on full time owes no placement fee and no conversion fee.

Does it cost a customer anything to post a contract?

No. Posting is free, and the customer chooses the rate it posts at.

What can you do next on Automate America?

Where can you find more contracts, professionals and training?

FOLLOW AUTOMATE AMERICA

Tony Wallace, TonyW@AutomateAmerica.com

Make it a great day, we're here to help.

About Tony Wallace

Content contributor at Automate America, the leading skilled trades marketplace.

Ready to find your next skilled trades contract?

Join Automate America and connect with top companies looking for your skills

Create Free ProfileRead More Articles